Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE TW 068 known as EMRALON TW-068
- Product Code
- 1485277
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N-Methyl-2-pyrrolidone | 872-50-4 | 5 - 10% | No |
| Diethylene glycol monobutyl ether | 112-34-5 | 1 - 5% | No |
| Carbon black | 1333-86-4 | 1 - 5% | No |
| Reaction mass of pentamethyl-4-piperidylsebacates | 1065336-91-5 | 0.1 - 1% | No |
| Triethylamine | 121-44-8 | 0.1 - 1% | No |
| 2-Butoxyethanol | 111-76-2 | 0.1 - 1% | No |
| 2-Dimethylaminoethanol | 108-01-0 | 0.1 - 1% | No |
| Diethyleneglycol monomethyl ether | 111-77-3 | 0.1 - 1% | No |
| 4-Nonylphenol, branched, ethoxylated~ | 127087-87-0 | 0.1 - 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
Rinse immediately with plenty of water and seek medical advice.
Get immediate medical attention. Do not induce vomiting.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only.
Store in a cool, dry place under low relative humidity, away from excessive heat. Protect from freezing, freezing temperature is <=32F (<=0C).
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials. Do not freeze.
This product may react with strong acids or oxidizing agents.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE TW 068 known as EMRALON TW-068?
The signal word is warning.
What is the physical form of LOCTITE TW 068 known as EMRALON TW-068?
LOCTITE TW 068 known as EMRALON TW-068 is a liquid with black color. It has ammoniacal odor.
What is the solubility of LOCTITE TW 068 known as EMRALON TW-068?
Disperses in water as a suspension
What is LOCTITE TW 068 known as EMRALON TW-068 used for?
Adhesive
What are the hazard statements for LOCTITE TW 068 known as EMRALON TW-068?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of LOCTITE TW 068 known as EMRALON TW-068?
The melting point is Not available. and the boiling point is > 100 °C (> 212°F) None.