Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE E-CO 1020 CONDUCTIVE COATING JR.99KG
- Product Code
- 2999157
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Primer
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Hazardous Component(s) | CAS Number | Weight %* | | --- | --- | --- | | Carbon black | 1333-86-4 | 1 - 5 | | Graphite | 7782-42-5 | 10 - 30 | * Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Carbon black | 1333-86-4 | 1 - 5% | Yes |
| Graphite | 7782-42-5 | 10 - 30% | Yes |
IDH number: 2999157 Product name: BONDERITE E-CO 1020 CONDUCTIVE COATING JR.99KG <!-- PAGE 2 --> IDH number: 2999157 Product name: BONDERITE E-CO 1020 CONDUCTIVE COATING JR.99KG Page 2 of 5
Notes
Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air.
Immediately wash skin thoroughly with soap and water.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.
Do not induce vomiting.
Immediate Medical Attention
If symptoms develop and persist, get medical attention (inhalation/skin). Seek immediate medical attention (eye). Get immediate medical attention (ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE S-FN AQUADAG E CONDUCTIVE COATING ACHESON
---
BONDERITE M-NT 2040 R2 PA22KG
---
BONDERITE M-NT 600SW CONVERSION COATING PA18KG AU
---
BONDERITE L-FG FB 412 BILLET COATING ACHESON known as DELTAGLAZE FB-412 20 KG
---
BONDERITE L-CA CG 595 PA20KG AN
---
BONDERITE M-CR NR-6207 1030KGSA
---
BONDERITE S-OT 310B FUNCTIONAL COATING ACHESON
---
BONDERITE S-ST 1270-5 AERO 200KG
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong acids or oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE E-CO 1020 CONDUCTIVE COATING JR.99KG?
The signal word is no signal word.
What is the physical form of BONDERITE E-CO 1020 CONDUCTIVE COATING JR.99KG?
BONDERITE E-CO 1020 CONDUCTIVE COATING JR.99KG is a liquid with black color. It has ammoniacal odor.
What is the solubility of BONDERITE E-CO 1020 CONDUCTIVE COATING JR.99KG?
Disperses in water - As emulsion Water
What is BONDERITE E-CO 1020 CONDUCTIVE COATING JR.99KG used for?
Primer
What is the melting point of BONDERITE E-CO 1020 CONDUCTIVE COATING JR.99KG?
The melting point is Not applicable, Product is a liquid and the boiling point is > 100 °C (> 212°F) no method / method unknown.