Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-NT 600SW CONVERSION COATING PA18KG AU
- Product Code
- 2861592
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Product for the conversion treatment of metals
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ammonium nitrate | 6484-52-2 | 1 - 5% | Yes |
| Polyoxyethylene trimethylnonyl ether, 8EO | 60828-78-6 | 1 - 5% | Yes |
| Nitric acid | 7697-37-2 | 0.1 - 1% | Yes |
| Hexafluorozirconic acid | 12021-95-3 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Rinse with large amounts of running water. For large burns (greater than 25 square inches), continually massage 2.5% calcium gluconate gel into the burn area until the pain is relieved. Get medical attention.
Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Get immediate medical attention. Eye flushing should continue during transportation to a doctor.
Get immediate medical attention. Do not induce vomiting. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-NT 1200 R20 CONVERSION COATING
---
BONDERITE M-NT 770X R N CONVERSION COATING
---
BONDERITE M-NT 2040 R2 PA22KG
---
BONDERITE M-NT 5700 WIPES CONVERSION COATING
---
BONDERITE M-NT 1455 CR FREE CONVERSION COATING known as BONDERITE 1455
---
BONDERITE M-NT 5700 CR FREE CONVERSION COATING known as ALODINE 5700
---
BONDERITE M-NT 1800 R27 NON CHROME COATING
---
BONDERITE L-CA CG 595 PA20KG AN
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. For industrial use only. Do not take internally.
For safe storage, store at or below 40 °C (104°F). Keep the container tightly closed and in a cool, well-ventilated place. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong acids or oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-NT 600SW CONVERSION COATING PA18KG AU?
The signal word is warning.
What is the physical form of BONDERITE M-NT 600SW CONVERSION COATING PA18KG AU?
BONDERITE M-NT 600SW CONVERSION COATING PA18KG AU is a liquid with light yellow color. It has acidic odor.
What is the solubility of BONDERITE M-NT 600SW CONVERSION COATING PA18KG AU?
Complete Water
What is BONDERITE M-NT 600SW CONVERSION COATING PA18KG AU used for?
Product for the conversion treatment of metals
What are the hazard statements for BONDERITE M-NT 600SW CONVERSION COATING PA18KG AU?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE M-NT 600SW CONVERSION COATING PA18KG AU?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F) calculated.