NextSDS Logo
Safety Data Sheet EN

BONDERITE C-SO 575 WB SOLVENT CLEANER

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-SO 575 WB SOLVENT CLEANER
Product Code
2383476

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Solvent cleaner

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4
Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H319 CAUSES SERIOUS EYE IRRITATION.
H332 HARMFUL IF INHALED.

Precautionary Statements

P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves, eye protection, and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313 If skin irritation occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Polyoxyethylene benzyl alcohol ether 26403-74-7 30 - 60% Yes
2-Butoxyethanol 111-76-2 10 - 30% Yes
benzyl alcohol 100-51-6 1 - 5% Yes

Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention.

Eye contact

Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.

Immediate Medical Attention

Not available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

This product is an aqueous mixture and although it will exhibit a flash point, it will not support combustion.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Do not take internally. Wash thoroughly after handling. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing.

Hygiene

Wash thoroughly after handling.

Fire prevention

Do not pressurize, cut, heat or weld containers.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Melting Point
Not determined
Metal Corrosion
---
Molecular Weight
---
Density
---
Flammability
Not applicable
Lower Explosive Limit
Not available.
Physical State Data
liquid
Kinematic Viscosity
Not available.
Bulk Density
---
Solubility In Fat
---
Evaporation Rate
Not determined
Odor
Amine
Properties Status
---
Explosive Limits
---
Ph
10.8 - 11.0
Vapor Pressure
Not determined
Physical State
Liquid
Decomposition Temperature
Not available.
Cloud Point
---
State Under Standard Conditions
---
Freezing Point
---
Upper Explosive Limit
Not available.
Appearance
---
Form
---
Auto Ignition Temperature
Not determined
Dynamic Viscosity
Not available.
Voc Content
25.7 % EPA Method 24
Solubility In Water
---
Colour
Colourless / Colorless
Softening Point
---
Colour Intensity
---
Boiling Point
> 100 °C (> 212°F) calculated
Relative Evaporation Rate
---
Relative Density
1.022 - 1.031 at 60 °F (15.56 °C)
Solubility
Complete Water
Crystallisation Point
---
Partition Coefficient
Not determined
Vapor Density
---
Solidification Point
---
Flash Point
> 100 °C (> 212°F) Closed cup; This product does not sustain combustion (ASTM D4206).
Odor Threshold
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

This product reacts with acids.

Hazardous reactions

None under normal processing.

Avoid

This product does not sustain combustion (ASTM D4206).

Incompatible

Strong oxidizing agents.

Decomposition

Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE C-SO 575 WB SOLVENT CLEANER?

The signal word is warning.

What is the physical form of BONDERITE C-SO 575 WB SOLVENT CLEANER?

BONDERITE C-SO 575 WB SOLVENT CLEANER is a liquid with colourless / colorless color. It has amine odor.

What is the solubility of BONDERITE C-SO 575 WB SOLVENT CLEANER?

Complete Water

What is BONDERITE C-SO 575 WB SOLVENT CLEANER used for?

Solvent cleaner

What are the hazard statements for BONDERITE C-SO 575 WB SOLVENT CLEANER?

This substance has 3 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H332: HARMFUL IF INHALED.

What is the melting point of BONDERITE C-SO 575 WB SOLVENT CLEANER?

The melting point is Not determined and the boiling point is > 100 °C (> 212°F) calculated.