NextSDS Logo
Safety Data Sheet EN

BONDERITE C-IC 151-2 ACID CLEANER BU

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-IC 151-2 ACID CLEANER BU
Product Code
3107581

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaners for Industrial Application

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

OXIDIZING LIQUID Cat. 3
Met. Corr. Cat. 1
Acute Tox. Cat. 3
Skin Corr. Cat. 1
Eye Dam. Cat. 1

GHS Pictograms

GHS03 - Oxidizing

GHS03

GHS05 - Corrosive

GHS05

GHS06 - Acute toxicity

GHS06

Hazard Statements

H272 MAY INTENSIFY FIRE; OXIDIZER.
H290 MAY BE CORROSIVE TO METALS.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
H331 TOXIC IF INHALED.

Precautionary Statements

P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P234 Keep only in original packaging.
P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363 Wash contaminated clothing before reuse.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P390 Absorb spillage to prevent material damage.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
Keep away from clothing and other combustible materials.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Nitric acid 30 - 60 %

Chemical Name CAS Number Concentration Hazardous
Nitric acid 7697-37-2 30 - 60% Yes

Notes

Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air. Get medical attention.

Skin contact

Immediately wash skin thoroughly with soap and water. Get medical attention.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get immediate medical attention. Do not induce vomiting.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only in well-ventilated areas. For industrial use only. Do not take internally.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Properties Status
---
Physical State Data
liquid
Explosive Limits
---
Solubility In Water
---
Ph
< 1
Kinematic Viscosity
---
Solidification Point
---
Bulk Density
---
Relative Density
1.2 - 1.3 at 15.56 °C (60.01 °F) Freq 001
Boiling Point
---
Voc Content
0 %
Relative Evaporation Rate
---
Solubility
---
Softening Point
---
Cloud Point
---
Evaporation Rate
---
Density
---
Flammability
Not applicable
State Under Standard Conditions
---
Odor
Sour/Acid
Vapor Pressure
---
Auto Ignition Temperature
---
Melting Point
---
Appearance
---
Molecular Weight
---
Form
---
Colour Intensity
---
Flash Point
Not applicable
Upper Explosive Limit
---
Metal Corrosion
---
Freezing Point
---
Physical State
Liquid
Dynamic Viscosity
---
Decomposition Temperature
---
Solubility In Fat
---
Colour
Colorless / Colorless
Crystallisation Point
---
Partition Coefficient
---
Odor Threshold
---
Lower Explosive Limit
---
Vapor Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This product may react with strong acids, bases and oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
2031
Shipping Name
Nitric acid solution
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE C-IC 151-2 ACID CLEANER BU?

The signal word is danger.

What is the physical form of BONDERITE C-IC 151-2 ACID CLEANER BU?

BONDERITE C-IC 151-2 ACID CLEANER BU is a liquid with colorless / colorless color. It has sour/acid odor.

What is BONDERITE C-IC 151-2 ACID CLEANER BU used for?

Cleaners for Industrial Application

What are the hazard statements for BONDERITE C-IC 151-2 ACID CLEANER BU?

This substance has 4 hazard statements:

  • H272: MAY INTENSIFY FIRE; OXIDIZER.
  • H290: MAY BE CORROSIVE TO METALS.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
  • H331: TOXIC IF INHALED.