Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK NCA 2286AG 30ML SY
- Product Code
- 2966754
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Assembly adhesives
Manufacturers & Suppliers
Henkel
manufacturer
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Thiol | --- | 10 - 30% | No |
| Acrylic Resin | --- | 10 - 30% | No |
| methacrylic acid | 79-41-4 | 0.1 - 1% | No |
| Silica, amorphous, treated | 68909-20-6 | 10 - 30% | No |
| 4,4'-isopropylidenediphenol-, polymer with (chloromethyl)oxirane, acrylate | 55818-57-0 | 5 - 10% | No |
| Epoxy resin | --- | 5 - 10% | No |
| 1,3,5-Tris[3-(trimethoxysilyl)propyl]-1,3,5-triazine-2,4,6(1H,3H,5H)-trione | 26115-70-8 | 1 - 5% | No |
| Siloxanes and Silicones, di-Me, reaction products with silica | 67762-90-7 | 1 - 5% | No |
| Photoinitiator | --- | 1 - 5% | No |
| Acrylate | --- | 1 - 5% | No |
| Epoxy resin | --- | 1 - 5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.
Rinse with running water and soap. Remove contaminated clothing and shoes. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated. If symptoms develop and persist, get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.
Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Seek medical attention immediately for eye contact and ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways. Prevent further leakage or spillage if safe to do so.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. See Section 8 of the SDS for Personal Protective Equipment.
For safe storage, store between -25 °C (-13°F) and -15 °C (5°F) Protect from direct sunlight. Keep away from heat, spark and flame.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. UV light.
Strong reducing agents. Free radical initiators. Inert gases. Oxygen scavengers. Strong oxidizing agents. Amines, strong alkalies Reactive metals. Strong acids.
Oxides of carbon. Irritating vapors. Oxides of sulfur.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Ethanethioic acid modif.+ hydrolized, Epoxy resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK NCA 2286AG 30ML SY?
The signal word is warning.
What is the physical form of LOCTITE ABLESTIK NCA 2286AG 30ML SY?
LOCTITE ABLESTIK NCA 2286AG 30ML SY is a liquid with black color. It has sulphur dioxide odor.
What is the solubility of LOCTITE ABLESTIK NCA 2286AG 30ML SY?
Not available.
What is LOCTITE ABLESTIK NCA 2286AG 30ML SY used for?
Assembly adhesives
What are the hazard statements for LOCTITE ABLESTIK NCA 2286AG 30ML SY?
This substance has 4 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE ABLESTIK NCA 2286AG 30ML SY?
The melting point is Not available. and the boiling point is Not available..