Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-GP 808 ACHESON
- Product Code
- 1969169
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy naphthenic | 64742-52-5 | 60 - 100% | Yes |
| Hydrotreated heavy naphtha | 64742-48-9 | 10 - 30% | Yes |
| Benzenesulfonic acid, di-C10-18-alkyl derivs. barium salts | 93820-55-4 | 1 - 5% | Yes |
IDH number: 1969169 Product name: BONDERITE L-GP 808 ACHESON
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove source of contamination or move victim to fresh air. If symptoms develop and persist, get medical attention.
Flush with large amounts of water. If skin irritation persists, call a physician.
Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Immediately contact a physician or poison control center. DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek immediate medical attention for eye contact. Immediately contact a physician or poison control center for ingestion.
Medical Treatment
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
This product is combustible at high temperatures.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Contain spill.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes. Avoid contact with skin and clothing. Wash thoroughly after handling. Provide adequate ventilation. Avoid breathing mists or aerosols of this product.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong oxidizing agents.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
Strong oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- NA 1993
- Shipping Name
- Combustible liquid, n.o.s. (Petroleum distillates)
- Transport Class
- Combustible Liquid
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-GP 808 ACHESON?
The signal word is danger.
What is the physical form of BONDERITE L-GP 808 ACHESON?
BONDERITE L-GP 808 ACHESON is a liquid with amber color. It has mineral-oil-like odor.
What is BONDERITE L-GP 808 ACHESON used for?
Lubricant
What are the hazard statements for BONDERITE L-GP 808 ACHESON?
This substance has 4 hazard statements:
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS
- H315: CAUSES SKIN IRRITATION
- H319: CAUSES SERIOUS EYE IRRITATION
- COMBUSTIBLE LIQUID
What is the melting point of BONDERITE L-GP 808 ACHESON?
The melting point is Not determined and the boiling point is Not applicable.