NextSDS Logo
Safety Data Sheet EN

BONDERITE L-GP GP 460 ACHESON

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE L-GP GP 460 ACHESON
Product Code
1225098

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Precautionary Statements

Not prescribed
Not prescribed
Not prescribed
Not prescribed

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Graphite (CAS 7782-42-5) 30 - 60%; Petrolatum (CAS 8009-03-8) 30 - 60%; White mineral oil (petroleum), highly refined (CAS 8042-47-5) 10 - 30%

Chemical Name CAS Number Concentration Hazardous
Graphite 7782-42-5 30 - 60% Yes
Petrolatum 8009-03-8 30 - 60% Yes
White mineral oil (petroleum), highly refined 8042-47-5 10 - 30% Yes

IDH number: 1225098 Product name: BONDERITE L-GP GP 460 ACHESON

Notes

Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.

Skin contact

Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get medical attention. Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.

Immediate Medical Attention

Treat symptomatically and supportively.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only.

Storage

For safe storage, store between 8 °C (46.4 °F) and 28 °C (82.4 °F)

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Water
Insoluble
Partition Coefficient
Not available.
Cloud Point
---
Boiling Point
300 °C (572°F)calculated
Flammability
Not applicable
Solubility In Fat
---
Odor Threshold
Not available.
Ph
Not applicable, Product is non-soluble (in water).
Density
1.199
Decomposition Temperature
Not available.
Properties Status
---
Explosive Limits
---
Physical State
Liquid
Molecular Weight
---
Crystallisation Point
---
Vapor Pressure
< 1 hPa (20 °C (68°F))
Odor
Slight
Bulk Density
---
Physical State Data
liquid
Evaporation Rate
Not applicable
Solubility
Negligible
Upper Explosive Limit
Not available.
Softening Point
---
Relative Density
---
State Under Standard Conditions
---
Melting Point
Not applicable, Product is a liquid
Relative Evaporation Rate
---
Colour
Gray / Grey
Dynamic Viscosity
Not available.
Solidification Point
---
Freezing Point
---
Appearance
---
Form
---
Flash Point
200 °C (392°F) Pensky Martens closed cup
Voc Content
0 g/l
Kinematic Viscosity
> 20.5 mm2/s
Lower Explosive Limit
Not available.
Colour Intensity
---
Auto Ignition Temperature
Not determined
Metal Corrosion
---
Vapor Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials. High temperatures.

Incompatible

This product may react with strong oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE L-GP GP 460 ACHESON?

The signal word is no signal word.

What is the physical form of BONDERITE L-GP GP 460 ACHESON?

BONDERITE L-GP GP 460 ACHESON is a liquid with gray / grey color. It has slight odor.

What is the solubility of BONDERITE L-GP GP 460 ACHESON?

Negligible

What is the melting point of BONDERITE L-GP GP 460 ACHESON?

The melting point is Not applicable, Product is a liquid and the boiling point is 300 °C (572°F)calculated.