Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA 9153 TWO-PART EPOXY known as LOCTITE LW BNDG CMPD 2OZ EN
- Product Code
- 1148153
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy Hardener
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS06
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calcium carbonate | 471-34-1 | 30 - 60% | Yes |
| Barium sulfate | 7727-43-7 | 10 - 30% | Yes |
| Diethylenetriamine | 111-40-0 | 5 - 10% | Yes |
| Titanium dioxide | 13463-67-7 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel
Do not allow product to enter sewer or waterways.
Ensure adequate ventilation. Wear appropriate personal protective equipment. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE EA 9330 AERO PART B 8OZ
---
LOCTITE EA 9394.2 AERO PART A 200ML
---
LOCTITE EA E-20HP A RESIN known as DB EPOXY ADH E-20HP 200ML RESIN
---
LOCTITE ECCOBOND FP4549 10MLX
---
LOCTITE LB 8031
---
LOCTITE LB 8009
---
LOCTITE LB 8018
---
LOCTITE LB 8156 known as Loctite 8156 500g EGFD
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Keep container closed.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame. Protect from direct sunlight.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
Strong acids. Strong bases. Strong oxidizing agents.
Oxides of carbon. Oxides of sulfur. Oxides of barium. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EA 9153 TWO-PART EPOXY known as LOCTITE LW BNDG CMPD 2OZ EN?
The signal word is danger.
What is the physical form of LOCTITE EA 9153 TWO-PART EPOXY known as LOCTITE LW BNDG CMPD 2OZ EN?
LOCTITE EA 9153 TWO-PART EPOXY known as LOCTITE LW BNDG CMPD 2OZ EN is a paste with beige color. It has sulfur odor.
What is the solubility of LOCTITE EA 9153 TWO-PART EPOXY known as LOCTITE LW BNDG CMPD 2OZ EN?
Insoluble Water
What is LOCTITE EA 9153 TWO-PART EPOXY known as LOCTITE LW BNDG CMPD 2OZ EN used for?
Epoxy Hardener
What are the hazard statements for LOCTITE EA 9153 TWO-PART EPOXY known as LOCTITE LW BNDG CMPD 2OZ EN?
This substance has 5 hazard statements:
- H315: CAUSES SKIN IRRITATION
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION
- H319: CAUSES SERIOUS EYE IRRITATION
- H330: FATAL IF INHALED
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED
What is the melting point of LOCTITE EA 9153 TWO-PART EPOXY known as LOCTITE LW BNDG CMPD 2OZ EN?
The melting point is Not available. and the boiling point is > 149 °C (> 300.2 °F).