Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA 3149 B CUSTOMER SPECIFIC EPOXY known as LOCTITE 3149 EPOXY 200ML PT B
- Product Code
- 1521036
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy Hardener
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Burning produces obnoxious and toxic fumes. Use of water may result in the formation of very toxic aqueous solutions.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Ensure adequate ventilation. Wear appropriate personal protective equipment. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE EA 9153 TWO-PART EPOXY known as LOCTITE LW BNDG CMPD 2OZ EN
---
LOCTITE EA 210209 EPOXY
---
LOCTITE EA 210232 EPOXY
---
LOCTITE EA E-20NS A RESIN known as DB EPOXY ADH E-20NS 200 ML RESI
---
LOCTITE EA E-20HP A RESIN known as DB EPOXY ADH E-20HP 200ML RESIN
---
LOCTITE SI 5607 B known as LOCTITE 5607 SIL PTB 400ML
---
LOCTITE EA 9460 400ML PTA
---
LOCTITE EA E-120HP A RESIN known as DB EPX ADH E-120HP 400 ML. RES
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Keep container closed.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame. Store in original container until ready to use.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
Oxidizing agents. Acids. Bases. Peroxides. Sodium hypochlorite. Reactive metals. This product slowly corrodes copper, aluminum, zinc and galvanized surfaces.
Oxides of carbon. Oxides of nitrogen. Aldehydes. Ammonia. Nitric acid. Toxic fumes. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2922
- Shipping Name
- Corrosive liquid, toxic, n.o.s.
- Transport Class
- 8 (6.1)
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EA 3149 B CUSTOMER SPECIFIC EPOXY known as LOCTITE 3149 EPOXY 200ML PT B?
The signal word is danger.
What is the physical form of LOCTITE EA 3149 B CUSTOMER SPECIFIC EPOXY known as LOCTITE 3149 EPOXY 200ML PT B?
LOCTITE EA 3149 B CUSTOMER SPECIFIC EPOXY known as LOCTITE 3149 EPOXY 200ML PT B is a liquid with black color. It has mild odor.
What is LOCTITE EA 3149 B CUSTOMER SPECIFIC EPOXY known as LOCTITE 3149 EPOXY 200ML PT B used for?
Epoxy Hardener
What are the hazard statements for LOCTITE EA 3149 B CUSTOMER SPECIFIC EPOXY known as LOCTITE 3149 EPOXY 200ML PT B?
This substance has 6 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
- H351: SUSPECTED OF CAUSING CANCER.
What is the melting point of LOCTITE EA 3149 B CUSTOMER SPECIFIC EPOXY known as LOCTITE 3149 EPOXY 200ML PT B?
The melting point is Not available. and the boiling point is Not available..