Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE AA 5251 A known as LOCTITE® 5251A™ SEALANT PART N
- Product Code
- 1196370
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Acrylics
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Acrylated carbamate | --- | 10 - 30% | Yes |
| Acrylate ester | 7328-17-8 | 5 - 10% | Yes |
| Silica, amorphous, fumed, cryst.-free | 112945-52-5 | 1 - 5% | Yes |
| N,N-Dimethylacrylamide | 2680-03-7 | 1 - 5% | Yes |
| 2-Hydroxy-2-methylpropiophenone | 7473-98-5 | 1 - 5% | Yes |
| Methacrylate ester | --- | 1 - 5% | Yes |
| Photoinitiator | --- | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get immediate medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Keep individual calm. Get immediate medical attention.
Immediate Medical Attention
Get medical attention for inhalation, eye contact, and ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE AA 3504 LC known as Loctite 3504
---
LOCTITE AA V5004 A
---
LOCTITE 565 LOW STRENGTH THREAD SEALANT known as LOCTITE® 565™ THREAD SEALANT P
---
LOCTITE AA 3554 1L EN/CH
---
LOCTITE 567 LOW STRENGTH THREAD SEALANT known as LOCTITE® 567™ THREAD SEALANT/P
---
LOCTITE SEALANT 5699 GREY/50 ML
---
LOCTITE 518
---
LOCTITE 518
UFI: XG6A-TX84-A20Q-77MS
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Do not taste or swallow. DO NOT heat or spray.
Store at or below 26 °C (78.8 °F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Not available.
Heat, flames, sparks and other sources of ignition. Avoid temperatures above 26°C (80°F). Store away from incompatible materials. Direct sunlight. UV light. Freezing conditions.
Strong acids and strong bases. Strong oxidizing agents. Reducing agents. Amines, strong alkalies Free radical initiators. Other polymerization initiators. Peroxides. Heavy metals. Inert gases. Oxygen scavengers.
Oxides of carbon. Oxides of nitrogen. Irritating organic vapours. Oxides of silicon.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE AA 5251 A known as LOCTITE® 5251A™ SEALANT PART N?
The signal word is danger.
What is the physical form of LOCTITE AA 5251 A known as LOCTITE® 5251A™ SEALANT PART N?
LOCTITE AA 5251 A known as LOCTITE® 5251A™ SEALANT PART N is a liquid with clear, yellow color. It has mild odor.
What is the solubility of LOCTITE AA 5251 A known as LOCTITE® 5251A™ SEALANT PART N?
Insoluble Water
What is LOCTITE AA 5251 A known as LOCTITE® 5251A™ SEALANT PART N used for?
Acrylics
What are the hazard statements for LOCTITE AA 5251 A known as LOCTITE® 5251A™ SEALANT PART N?
This substance has 4 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H318: CAUSES SERIOUS EYE DAMAGE.
What is the melting point of LOCTITE AA 5251 A known as LOCTITE® 5251A™ SEALANT PART N?
The melting point is Not available. and the boiling point is > 93 °C (> 199.4 °F).