BONDERITE M-CR ALUMIGOLD C AERO

Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. Administer oxygen or artificial respiration as needed. Do not use mouth-to-mouth method if victim ingested or inhaled the substance. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.

Symptoms: Delayed effects possible after inhalation.

Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. GET IMMEDIATE MEDICAL ATTENTION. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided. Topical 10% EDTA ointment can be used to treat chromate scabs and skin ulcers. A 10% ascorbic acid solution may speed healing if applied promptly. Launder contaminated clothing before reuse. Discard any shoes or clothing items that cannot be decontaminated.

Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Get immediate medical attention. Eye flushing should continue during transportation to a doctor.

Get immediate medical attention. Do not induce vomiting. If individual is conscious, wash out mouth with water. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting. Provide a glass of water to dilute the material in the stomach.

Water spray (fog), foam, dry chemical or carbon dioxide.

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Wear full protective clothing. Wear self-contained breathing apparatus.

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Prevent further leakage or spillage if safe to do so. Contain spill. Ventilate area. Do not allow product to enter sewer or waterways. Isolate area. Keep unnecessary personnel away.

Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container. Flush area with water to remove trace residue.

Materials: inert absorbent such as sand or vermiculite

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Use caution when combining with water; DO NOT add water to acid, ALWAYS add acid to water while stirring to prevent release of heat, steam and fumes. Launder work clothes frequently. Do not store or consume food, drink, or tobacco products in areas where they may become contaminated with this material. Do not take internally. For industrial use only.

Keep the container tightly closed and in a cool, well-ventilated place. If stored outside of this range, mix well before using.

Wash thoroughly after handling. Launder work clothes frequently. Do not store or consume food, drink, or tobacco products in areas where they may become contaminated with this material.

Stable at normal conditions.

Not available.

None under normal processing.

Store away from incompatible materials.

This product may react with strong reducing agents. This product may react with strong acids, bases and oxidizing agents. Keep away from organic and combustible materials. Strong bases. Metals.

May liberate hydrogen fluoride. Oxides of zinc. Chromium oxide.