Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-ST 6950 AERO
- Product Code
- 1068795
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint stripping agents
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| benzyl alcohol | 100-51-6 | 40 - 50% | Yes |
| hydrogen peroxide solution | 7722-84-1 | 1 - 5% | Yes |
| Anisole | 100-66-3 | 1 - 5% | Yes |
| Alkanes, C11-15-iso- | 90622-58-5 | 1 - 5% | Yes |
| 2-Methylbut-3-yn-2-ol | 115-19-5 | 1 - 5% | Yes |
IDH number: 1068795 Product name: BONDERITE S-ST 6950 AERO
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
For skin contact flush with large amounts of water. Obtain medical attention if irritation persists.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). Obtain medical attention if irritation persists (skin). Seek immediate medical attention (eyes). Get immediate medical attention (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
This product is combustible at high temperatures.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Keep container closed. Use only with adequate ventilation. Wash thoroughly after handling. For industrial use only.
Store between 40 °F (4.4 °C) and 100 °F (37.8 °C). Keep in a cool, well ventilated area. Do not store around flammable or combustible materials. Do not freeze. Supplier recommends that this product be stored with a vented bung.
Wash thoroughly after handling.
Do not store around flammable or combustible materials. Do not pressurize, cut, heat or weld containers.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong acids or oxidizing agents. This product may react with strong reducing agents. Explosive hydrogen gas may be formed from contact with amphoteric metals (metals which can react either as an acid or as a base).
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-ST 6950 AERO?
The signal word is danger.
What is the physical form of BONDERITE S-ST 6950 AERO?
BONDERITE S-ST 6950 AERO is a liquid with opaque white color. It has solvent odor.
What is BONDERITE S-ST 6950 AERO used for?
Paint stripping agents
What are the hazard statements for BONDERITE S-ST 6950 AERO?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H318: CAUSES SERIOUS EYE DAMAGE.
- H331: TOXIC IF INHALED.
What is the melting point of BONDERITE S-ST 6950 AERO?
The melting point is Not determined and the boiling point is >361 °F (>182.8 °C).