Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE NS 5025A
- Product Code
- 1537424
- Synonyms
- LOCTITE 5025A 40LB EN
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| hexamethylene diacrylate | 13048-33-4 | 10 - 30% | Yes |
| Tris(2-ethylhexyl) benzene-1,2,4-tricarboxylate | 3319-31-1 | 5 - 10% | Yes |
| N,N-Dimethylacrylamide | 2680-03-7 | 1 - 5% | Yes |
| Trimethoxyvinylsilane | 2768-02-7 | 1 - 5% | Yes |
| Silanamine, 1,1,1-trimethyl-N-(trimethylsilyl)-, hydrolysis products with silica | 68909-20-6 | 1 - 5% | Yes |
| Methanol | 67-56-1 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention.
Wash with soap and water. Remove contaminated clothing and footwear. Wash clothing before reuse. If symptoms develop and persist, get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Keep individual calm. Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Do not use high volume water jet.
Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a partly filled, closed container until disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not taste or swallow. DO NOT heat or spray.
store between 4 °C (39.2 °F) and 28 °C (82.4 °F)
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing. May occur when exposed to high heat or ultraviolet radiation.
Keep away from heat, spark and flame. Store away from incompatible materials. Freezing conditions. Protect from direct sunlight. UV light. Inert gas blanketing. Loss of polymerization inhibitor. Loss of dissolved air.
Strong oxidizing agents. Free radical initiators. Reducing agents. Acids and bases. Oxygen scavengers. Peroxides. Reactive metals. Alkalis. Water. Iron. Rust.
Oxides of carbon. Oxides of nitrogen. Oxides of silicon. Oxides of tin. Hydrocarbons. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is LOCTITE NS 5025A known by?
LOCTITE NS 5025A is also known as: LOCTITE 5025A 40LB EN
What is the hazard signal word for LOCTITE NS 5025A?
The signal word is danger.
What is the physical form of LOCTITE NS 5025A?
LOCTITE NS 5025A is a liquid with transparent, yellow color. It has mild odor.
What is the solubility of LOCTITE NS 5025A?
Not available.
What is LOCTITE NS 5025A used for?
Sealant
What are the hazard statements for LOCTITE NS 5025A?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H318: CAUSES SERIOUS EYE DAMAGE.
What is the melting point of LOCTITE NS 5025A?
The melting point is Not available. and the boiling point is Not available..