Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE C-MC 5886
- Product Form
- Alkaline Cleaner for Industrial Application
- Product Code
- 2393700
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Solvent naphtha (petroleum), heavy arom. > 1% naphthalene | 64742-94-5 | 10 - 30% | Yes |
| Triethanolamine | 102-71-6 | 5 - 10% | Yes |
| Fatty acids, tall-oil, amine soap | --- | 5 - 10% | Yes |
| 2-methylpentane-2,4-diol | 107-41-5 | 1 - 5% | Yes |
| (2-Methoxymethylethoxy)propanol | 34590-94-8 | 1 - 5% | Yes |
| Alcohols, C 12-15, ethoxylate | 68131-39-5 | 1 - 5% | Yes |
| Isotridecanol, ethoxylated~ | 9043-30-5 | 1 - 5% | Yes |
| Naphthalene | 91-20-3 | 1 - 5% | Yes |
| (Z)-N-[2-(2-hydroxyethoxy)ethyl]-9-octadecenamide | 20429-33-8 | 1 - 5% | Yes |
| 1-(1-Methyl-2-propoxyethoxy)propan-2-ol | 29911-27-1 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. Get medical attention.
For skin contact flush with large amounts of water. Obtain medical attention if irritation persists.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately. Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Ground and bond all equipment as required (when transferring products).
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong acids or oxidizing agents. Do not mix this product with fluids which contain NITRITES/NITRATES. NITROSAMINE may be formed.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Solvent Naphtha (Petroleum), heavy aromatic)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE C-MC 5886?
The signal word is danger.
What is the physical form of BONDERITE C-MC 5886?
BONDERITE C-MC 5886 is a liquid with yellow-orange color. It has aromatic odor.
What is the solubility of BONDERITE C-MC 5886?
Disperses in water as emulsion Water
What are the hazard statements for BONDERITE C-MC 5886?
This substance has 3 hazard statements:
- H227: COMBUSTIBLE LIQUID
- H315: CAUSES SKIN IRRITATION
- H318: CAUSES SERIOUS EYE DAMAGE
What is the melting point of BONDERITE C-MC 5886?
The melting point is Not determined and the boiling point is 100 °C (212°F)calculated.