NextSDS Logo
Safety Data Sheet EN

BONDERITE M-PA 5412-A

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE M-PA 5412-A
Product Code
2032208

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Passivating agent

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

CORROSIVE TO METALS Cat. 1
SKIN CORROSION Cat. 1B
SERIOUS EYE DAMAGE Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

EUH031 CONTAINS FLUORIDES.
EUH070 LONG TERM EXPOSURE TO FLUORIDES OVER YEARS MAY CAUSE FLUOROSIS!
H290 MAY BE CORROSIVE TO METALS.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
MAY CAUSE DELAYED BURNS (NOT IMMEDIATELY PAINFUL OR VISIBLE)!

Precautionary Statements

P234 Keep only in original packaging.
P264 Wash thoroughly after handling.
P280 Wear protective gloves, eye protection, and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P310 Immediately call a poison control center or physician.
P331 Do NOT induce vomiting.
P338 Remove contact lenses, if present and easy to do.
P338 Continue rinsing.
P351 IF IN EYES: Rinse cautiously with water for several minutes.
P361 If on skin (or hair): Take off immediately all contaminated clothing.
P363 Wash contaminated clothing before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P406 Store in corrosive resistant container with a resistant inner liner.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
Do not breathe vapors, mist, or spray.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Monoammonium phosphate 7722-76-1 1 - 5% Yes
Hexafluorotitanic acid 17439-11-1 1 - 5% Yes
Phosphoric acid 7664-38-2 0.1 - 1% Yes

IDH number: 2032208 Product name: BONDERITE M-PA 5412-A

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. If breathing is difficult, give oxygen. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.

Skin contact

Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. GET IMMEDIATE MEDICAL ATTENTION. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.

Eye contact

Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Get immediate medical attention. Eye flushing should continue during transportation to a doctor.

Ingestion

Get immediate medical attention. Do not induce vomiting. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Get immediate medical attention for all exposure routes.

Medical Treatment

Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Avoid breathing mists or aerosols of this product. Wash thoroughly after handling. For industrial use only.

Storage

Keep the container tightly closed and in a cool, well-ventilated place. Thaw and mix thoroughly if frozen.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Form
---
Odor
Odorless
Decomposition Temperature
Not available.
Flash Point
Not applicable
Solubility
---
Ph
< 2
Boiling Point
> 100 °C (> 212°F) calculated
Explosive Limits
---
Solubility In Fat
---
Relative Density
1.039 - 1.089
Properties Status
---
Kinematic Viscosity
---
Softening Point
---
Vapor Pressure
Not determined
Solubility In Water
Complete
Upper Explosive Limit
Not applicable
Auto Ignition Temperature
Not applicable
Dynamic Viscosity
---
Flammability
Not applicable
Physical State Data
liquid
State Under Standard Conditions
---
Physical State
Liquid
Relative Evaporation Rate
---
Odor Threshold
Not available.
Evaporation Rate
Not determined
Molecular Weight
---
Lower Explosive Limit
Not applicable
Voc Content
0 % (calculated)
Melting Point
Not determined
Colour
Water white
Freezing Point
---
Partition Coefficient
Not determined
Metal Corrosion
---
Bulk Density
---
Solidification Point
---
Density
---
Cloud Point
---
Crystallisation Point
---
Vapor Density
Not determined
Colour Intensity
---
Appearance
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This material will react with glass, concrete, certain metals, silica containing materials, rubber, leather, and many organics. This product may react with strong acids, bases and oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. May liberate hydrogen fluoride.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3264
Shipping Name
Corrosive liquid, acidic, inorganic, n.o.s. (Hexafluoro titanic acid, Phosphoric acid)
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE M-PA 5412-A?

The signal word is danger.

What is the physical form of BONDERITE M-PA 5412-A?

BONDERITE M-PA 5412-A is a liquid with water white color. It has odorless odor.

What is BONDERITE M-PA 5412-A used for?

Passivating agent

What are the hazard statements for BONDERITE M-PA 5412-A?

This substance has 5 hazard statements:

  • EUH031: CONTAINS FLUORIDES.
  • EUH070: LONG TERM EXPOSURE TO FLUORIDES OVER YEARS MAY CAUSE FLUOROSIS!
  • H290: MAY BE CORROSIVE TO METALS.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
  • MAY CAUSE DELAYED BURNS (NOT IMMEDIATELY PAINFUL OR VISIBLE)!

What is the melting point of BONDERITE M-PA 5412-A?

The melting point is Not determined and the boiling point is > 100 °C (> 212°F) calculated.