Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON PV 1035.1 RECON DRUM 309KG
- Product Code
- 2898597
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
PVC-sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 30 - 60% | Yes |
| Tris(2-ethylhexyl) benzene-1,2,4-tricarboxylate | 3319-31-1 | 10 - 30% | Yes |
| Polyvinyl chloride | 9002-86-2 | 5 - 10% | Yes |
| Benzoic acid, C9-11-branched alkyl esters | 131298-44-7 | 5 - 10% | Yes |
| Calcium oxide | 1305-78-8 | 1 - 5% | Yes |
| Fatty acids, C8-18 and C18-unsatd. | 67701-05-7 | 1 - 5% | Yes |
| Sodium dodecyl sulphate | 151-21-3 | 0.1 - 1% | Yes |
| Quartz (SiO2) respirable particulates (RCS) >=10% | 14808-60-7 | 0.1 - 1% | Yes |
| Titanium dioxide | 13463-67-7 | 0.1 - 1% | Yes |
| Hexane, 1,6-diisocyanato-, homopolymer, Me Et ketone oxime-blocked | 85940-94-9 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
DO NOT induce vomiting unless directed to do so by medical personnel.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
None identified.
Wear self-contained breathing apparatus. Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Do not take internally. For industrial use only.
Store between 10 °C (50°F) and 30 °C (86°F). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat and direct sunlight. Do not handle or store near an open flame, heat or other sources of ignition.
Do not handle or store near an open flame, heat or other sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Not available.
Will not occur.
Heat, flames, sparks and other sources of ignition.
This product may react with strong acids or oxidizing agents.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Heat and processing may result in the release of low levels of vinyl chloride.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON PV 1035.1 RECON DRUM 309KG?
The signal word is danger.
What is the physical form of TEROSON PV 1035.1 RECON DRUM 309KG?
TEROSON PV 1035.1 RECON DRUM 309KG is a liquid with white color. It has mild odor.
What is the solubility of TEROSON PV 1035.1 RECON DRUM 309KG?
Insoluble Water
What is TEROSON PV 1035.1 RECON DRUM 309KG used for?
PVC-sealant
What are the hazard statements for TEROSON PV 1035.1 RECON DRUM 309KG?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H350: MAY CAUSE CANCER.
What is the melting point of TEROSON PV 1035.1 RECON DRUM 309KG?
The melting point is Not applicable and the boiling point is 104.4 °C (219.9 °F).