NextSDS Logo
Safety Data Sheet EN

TEROSON RB 5185 260 KG

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON RB 5185 260 KG
Product Form
rubber varnish
Product Code
2633437

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Dam. Cat. 1
Skin Sens. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H318 CAUSES SERIOUS EYE DAMAGE.

Precautionary Statements

P261 Avoid breathing dust or fumes.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, eye protection, and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Limestone 1317-65-3 30 - 60% Yes
Talc 14807-96-6 5 - 10% Yes
di(benzothiazol-2-yl) disulphide 120-78-5 1 - 5% Yes
sulfur 7704-34-9 1 - 5% Yes
Zinc oxide 1314-13-2 1 - 5% Yes
Calcium oxide 1305-78-8 1 - 5% Yes
Aluminum triphosphate 13939-25-8 1 - 5% Yes
Carbon black - Nano 1333-86-4 0.1 - 1% Yes
2-Mercaptobenzothiazole 149-30-4 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air.

Skin contact

Immediately wash skin thoroughly with soap and water.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.

Ingestion

Do not induce vomiting.

Immediate Medical Attention

Get immediate medical attention (for eye contact and ingestion). If symptoms develop and persist for inhalation or skin contact, get medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not breathe fumes or dust from this material. Use only with adequate ventilation. Do not take internally. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Form
---
Cloud Point
---
Evaporation Rate
---
Metal Corrosion
---
Relative Density
---
Appearance
---
Ph
Not applicable, Product is non-soluble (in water).
Crystallisation Point
---
Flammability
Not applicable
Lower Explosive Limit
Not available.
Flash Point
Not applicable
Partition Coefficient
Not available.
Freezing Point
---
Colour Intensity
---
Vapor Pressure
0.1 hPa Supplier method
Solubility
Insoluble Water
Solubility In Fat
---
Physical State Data
liquid
Vapor Density
---
Physical State
Solid
Solubility In Water
---
Molecular Weight
---
Kinematic Viscosity
Not available.
Explosive Limits
---
Odor
Characteristic
Melting Point
Not applicable, Determination technically not possible
Softening Point
---
Odor Threshold
Not available.
State Under Standard Conditions
---
Relative Evaporation Rate
---
Upper Explosive Limit
Not available.
Bulk Density
---
Boiling Point
Not applicable, Determination technically not possible
Voc Content
Not available.
Dynamic Viscosity
53 mPa.s
Density
---
Decomposition Temperature
Not available.
Colour
Dark gray / grey
Auto Ignition Temperature
Not available.
Properties Status
---
Solidification Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This product may react with strong acids or oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3077
Shipping Name
Environmentally hazardous substance, solid, n.o.s. (Dibenzo thiazyl disulfide)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON RB 5185 260 KG?

The signal word is danger.

What is the physical form of TEROSON RB 5185 260 KG?

TEROSON RB 5185 260 KG is a solid with dark gray / grey color. It has characteristic odor.

What is the solubility of TEROSON RB 5185 260 KG?

Insoluble Water

What are the hazard statements for TEROSON RB 5185 260 KG?

This substance has 3 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H318: CAUSES SERIOUS EYE DAMAGE.

What is the melting point of TEROSON RB 5185 260 KG?

The melting point is Not applicable, Determination technically not possible and the boiling point is Not applicable, Determination technically not possible.