Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 014400 - PROSOLVE
- Product Form
- Mixture
- Product Code
- 014400
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- E9V8-31EK-Q00E-MHYX
Identified Uses
Cleansing agent, Aerosol.
Uses advised against
No additional information available
Manufacturers & Suppliers
ITW Spraytec
manufacturer
42, rue Gallieni, F-92600 Asnières sur Seine - France
+33(0)1.40.80.32.32
http://www.jelt.fr
Emergency Contacts
Emergency Contact
+33 (0)1 45 42 59 59
National Poisons Information Service (Newcastle Centre) Regional Drugs and Therapeutics Centre, Wolfson Unit
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbures, C9-C11, n-alkanes, isoalkanes, cycliques, <2% aromatiques EC: 927-356-8 | --- | 40 - 60% | Yes |
| (R)-p-mentha-1,8-diene; d-limonene EC: 227-813-5 | 5989-27-5 | 30 - 50% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: Irritation. May cause an allergic skin reaction.
Rinse eyes with water as a precaution.
Call a POISON CENTER/doctor/physician if you feel unwell.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide. Water haze. Water spray.
Do not use a heavy water stream.
Extremely flammable aerosol. Pressurised container: May burst if heated.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not attempt to take action without suitable protective equipment. For further information refer to section 8: "Exposure controls/personal protection".
Avoid release to the environment.
Mechanically recover the product.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Use only outdoors or in a well-ventilated area. Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes. Wear personal protective equipment.
Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F. Store locked up. Store in a well-ventilated place. Keep container tightly closed. Keep cool.
Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Wear gloves. Chemical resistant gloves (according to European standard NF EN 374 or equivalent). The choice of appropriate gloves depends not only on the material, but also on other quality criteria that may vary from one manufacturer to another. As the product is a preparation made from several substances, glove material resistance may not be calculated in advance and must be tested before use. The exact penetration time of glove material is to be determined by the manufacturer of protective gloves and respected.
In case of splash hazard: safety glasses
In case of insufficient ventilation, wear suitable respiratory equipment
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Extremely flammable aerosol. Pressurised container: May burst if heated.
Heating may cause a fire or explosion.
Heating
Strong acids. Strong bases.
Thermal decomposition generates : fume. Carbon dioxide. Carbon monoxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 014400 - PROSOLVE?
The signal word is danger.
What is the physical form of 014400 - PROSOLVE?
014400 - PROSOLVE is a liquid with colourless. color. It has organic solvent. odor.
What is the solubility of 014400 - PROSOLVE?
insoluble in water. soluble in most organic solvents.
What is 014400 - PROSOLVE used for?
Cleansing agent, Aerosol.
What are the hazard statements for 014400 - PROSOLVE?
This substance has 6 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H336: May cause drowsiness or dizziness.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of 014400 - PROSOLVE?
The melting point is No data available and the boiling point is < 0 °C.