Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK QMI538NB known as HYSOL QMI538NB (6.5g)
- Product Code
- 1435130
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Die attach adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethene, tetrafluoro-, homopolymer | 9002-84-0 | 30 - 60% | Yes |
| Bismaleimide resin | --- | 10 - 30% | Yes |
| Titanium dioxide | 13463-67-7 | 5 - 10% | Yes |
| Additive | --- | 1 - 5% | Yes |
| Initiator | --- | 1 - 5% | Yes |
| Substituted silane | --- | 0.1 - 1% | Yes |
| Naphtha (petroleum), hydrotreated heavy (<0.1% benzene) | 64742-48-9 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Check for and remove any contact lenses. Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Isolate area. Keep unnecessary personnel away.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK QMI536NB known as Hysol QMI536NB (6.85g)
---
LOCTITE ABLESTIK QMI536NB known as HYSOL QMI536NB (13.7g)
---
LOCTITE ABLESTIK QMI529HT known as HYSOL QMI529HT (20.5g)
---
LOCTITE ABLESTIK QMI529HT-LV known as Hysol QMI529HT-LV (20.5g)
---
LOCTITE ABLESTIK QMI505MT known as HYSOL QMI505MT (102G)
---
LOCTITE ABLESTIK QMI536 known as Hysol QMI536 (6 oz cartridge)
---
LOCTITE ABLESTIK QMI516 known as HYSOL QMI516 10cc EFD NS
---
LOCTITE ABLESTIK QMI529HT
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed.
Store at or below -40 °C (-40°F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
High temperatures. Store away from incompatible materials. Heat, flames, sparks and other sources of ignition.
Strong oxidizing agents. Strong acids and strong bases. Finely divided active metals.
Hydrogen fluoride. Hydrocarbons. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Bismaleimide resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK QMI538NB known as HYSOL QMI538NB (6.5g)?
The signal word is warning.
What is the physical form of LOCTITE ABLESTIK QMI538NB known as HYSOL QMI538NB (6.5g)?
LOCTITE ABLESTIK QMI538NB known as HYSOL QMI538NB (6.5g) is a liquid with white color. It has odourless / odorless odor.
What is the solubility of LOCTITE ABLESTIK QMI538NB known as HYSOL QMI538NB (6.5g)?
Insoluble Water
What is LOCTITE ABLESTIK QMI538NB known as HYSOL QMI538NB (6.5g) used for?
Die attach adhesive
What are the hazard statements for LOCTITE ABLESTIK QMI538NB known as HYSOL QMI538NB (6.5g)?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
What is the melting point of LOCTITE ABLESTIK QMI538NB known as HYSOL QMI538NB (6.5g)?
The melting point is Not available. and the boiling point is Not available..