Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK QMI505MT known as HYSOL QMI505MT (102G)
- Product Code
- 1432072
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silver | 7440-22-4 | 60 - 80% | Yes |
| Bismaleimide resin | --- | 10 - 30% | Yes |
| Additive | --- | 1 - 5% | Yes |
| Substituted silane | --- | 0.1 - 1% | Yes |
| Methylacrylic acid, Pd (2+) salt | --- | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Not available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK QMI536NB known as HYSOL QMI536NB (13.7g)
---
LOCTITE ABLESTIK QMI529HT known as HYSOL QMI529HT (20.5g)
---
LOCTITE ABLESTIK QMI538NB known as HYSOL QMI538NB (6.5g)
---
LOCTITE ABLESTIK QMI536NB known as Hysol QMI536NB (6.85g)
---
LOCTITE ABLESTIK QMI529HT-LV known as Hysol QMI529HT-LV (20.5g)
---
LOCTITE ABLESTIK QMI536 known as Hysol QMI536 (6 oz cartridge)
---
LOCTITE ABLESTIK QMI516 known as HYSOL QMI516 10cc EFD NS
---
LOCTITE ABLESTIK QMI505MT known as QMI 505MT Stock (7150) 10cc EFD
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Keep container closed.
Store at or below -40 °C. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Maintain head space in storage containers to support oxygen requirements of the inhibitor(s).
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
May occur with excessive aging, excessive heat, polymerization catalyst, inhibitor depletion, direct sunlight and under oxygen-free atmospheres.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. Loss of polymerization inhibitor. Loss of dissolved air.
Oxidizing agents. Reducing agents. Strong acids and strong bases. Free radical initiators. Peroxides.
Oxides of carbon. Oxides of Metals in Section 3. Toxic fumes. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK QMI505MT known as HYSOL QMI505MT (102G)?
The signal word is warning.
What is the physical form of LOCTITE ABLESTIK QMI505MT known as HYSOL QMI505MT (102G)?
LOCTITE ABLESTIK QMI505MT known as HYSOL QMI505MT (102G) is a liquid with silver color. It has odourless / odorless odor.
What is the solubility of LOCTITE ABLESTIK QMI505MT known as HYSOL QMI505MT (102G)?
Insoluble Water
What is LOCTITE ABLESTIK QMI505MT known as HYSOL QMI505MT (102G) used for?
Epoxy adhesive
What are the hazard statements for LOCTITE ABLESTIK QMI505MT known as HYSOL QMI505MT (102G)?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
What is the melting point of LOCTITE ABLESTIK QMI505MT known as HYSOL QMI505MT (102G)?
The melting point is Not available. and the boiling point is Not determined.