Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Loctite PL500 Landscape Construction Adhesive
- Product Code
- 2366574
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| acetone | 67-64-1 | 10 - 30% | No |
| Dolomite | 16389-88-1 | 10 - 30% | No |
| Kaolin | 1332-58-7 | 10 - 30% | No |
| Limestone | 1317-65-3 | 5 - 10% | No |
| Petroleum resins | 64742-16-1 | 1 - 5% | No |
| Methyl acetate | 79-20-9 | 1 - 5% | No |
| Quartz (SiO2) respirable particulates (RCS) >=10% | 14808-60-7 | 0.1 - 1% | No |
| Cristobalite | 14464-46-1 | 0.1 - 1% | No |
| Titanium dioxide | 13463-67-7 | 0.1 - 1% | No |
| Quartz (SiO2), <1% respirable | 14808-60-7 | 0.1 - 1% | No |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration.
Immediately wash skin thoroughly with soap and water.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.
Do not induce vomiting.
Immediate Medical Attention
Seek immediate medical attention for eye contact and ingestion. If symptoms develop and persist after inhalation or skin contact, get medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Not available.
Closed containers may explode when exposed to extreme heat. Vapors may form explosive mixtures with air. Vapors are heavier than air and may travel along floor to an ignition source.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear a self-contained breathing apparatus with a full face piece operated in pressure-demand or other positive pressure mode. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel
Eliminate all sources of ignition or flammables that may come into contact with a spill of this material. Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: noncombustible absorbent material such as sand
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not pressurize, cut, heat or weld containers. Empty product containers may contain product residue. Do not reuse empty containers. Use only in well-ventilated areas. Keep out of the reach of children. Keep away from heat, spark and flame. Containers should be grounded and bonded to the receiving container.
Store between -20 °C (-4°F) and 50 °C (122°F). Keep away from heat, spark and flame. Keep containers closed when not in use. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Keep away from heat, spark and flame. Remove all sources of ignition. Ground and bond metal containers for liquid transfer to avoid static sparks.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Heat, flames, sparks and other sources of ignition.
Strong oxidizing agents. Acids. Amines. Bases.
Carbon dioxide, carbon monoxide and irritating and/or toxic gases and particulate may be generated by thermal decomposition or combustion.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1133
- Shipping Name
- Adhesives
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Loctite PL500 Landscape Construction Adhesive?
The signal word is danger.
What is the physical form of Loctite PL500 Landscape Construction Adhesive?
Loctite PL500 Landscape Construction Adhesive is a liquid with light beige color. It has acetone odor.
What is the solubility of Loctite PL500 Landscape Construction Adhesive?
Miscible Water
What are the hazard statements for Loctite PL500 Landscape Construction Adhesive?
This substance has 3 hazard statements:
- H225: HIGHLY FLAMMABLE LIQUID AND VAPOUR.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of Loctite PL500 Landscape Construction Adhesive?
The melting point is < 0 °C (< 32°F) and the boiling point is 56 - 57 °C (132.8 - 134.6 °F).