NextSDS Logo
Safety Data Sheet EN

LOCTITE ABLESTIK 5662 known as Ablefilm 5662, 6 x 6

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE ABLESTIK 5662 known as Ablefilm 5662, 6 x 6
Product Code
1202513

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Thin film

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Skin Sens. Cat. 1
Repr. Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.
H361 SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P261 Avoid breathing dust or fumes.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P352 IF ON SKIN: Wash with plenty of water.
P362 Take off contaminated clothing.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Polyimide polymer --- 30 - 60% Yes
Modified epoxy resin --- 30 - 60% Yes
Epoxy resin --- 0.1 - 1% Yes
4,4'-Isopropylidenediphenol 80-05-7 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Skin contact

Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). Wash clothing before reuse.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.

Ingestion

Do not induce vomiting. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Get medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

This product is combustible at high temperatures.

Instructions

In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Sweep up or gather material and place in appropriate container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only with adequate ventilation. Wear suitable protective clothing, gloves and eye/face protection. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling.

Storage

Store in a cool, dry, well-ventilated area. Store in original container until ready to use.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Fat
---
Colour
Amber, Transparent
Dynamic Viscosity
---
Melting Point
Not determined
Kinematic Viscosity
---
Solidification Point
---
Upper Explosive Limit
Not available.
Properties Status
---
Flammability
Not applicable
Vapor Pressure
Not applicable
Boiling Point
Not applicable
Freezing Point
---
Vapor Density
Not applicable
Solubility
---
Evaporation Rate
Not determined
Decomposition Temperature
Not available.
Auto Ignition Temperature
Not available.
Density
---
Partition Coefficient
Not determined
Crystallisation Point
---
Explosive Limits
---
Form
---
Physical State Data
solid
Ph
Not available.
Odor Threshold
Not available.
Physical State
Solid, Film
Molecular Weight
---
Relative Evaporation Rate
---
Voc Content
< 1.0 %
Solubility In Water
Insoluble
State Under Standard Conditions
---
Lower Explosive Limit
Not available.
Appearance
---
Softening Point
---
Odor
---
Colour Intensity
---
Metal Corrosion
---
Flash Point
> 100 °C (> 212°F)
Cloud Point
---
Relative Density
1.29
Bulk Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Elevated temperatures.

Incompatible

Strong oxidizing agents. Amines.

Decomposition

Oxides of carbon. Oxides of nitrogen. Irritating vapors.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE ABLESTIK 5662 known as Ablefilm 5662, 6 x 6?

The signal word is warning.

What is the physical form of LOCTITE ABLESTIK 5662 known as Ablefilm 5662, 6 x 6?

LOCTITE ABLESTIK 5662 known as Ablefilm 5662, 6 x 6 is a solid, film with amber, transparent color.

What is LOCTITE ABLESTIK 5662 known as Ablefilm 5662, 6 x 6 used for?

Thin film

What are the hazard statements for LOCTITE ABLESTIK 5662 known as Ablefilm 5662, 6 x 6?

This substance has 4 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.

What is the melting point of LOCTITE ABLESTIK 5662 known as Ablefilm 5662, 6 x 6?

The melting point is Not determined and the boiling point is Not applicable.