Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON EV 11007 2X30X30
- Product Code
- 2484340
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 40 - 50% | Yes |
| CP Bisphenol A Diglycidylether | 25036-25-3 | 5 - 10% | Yes |
| Propylidynetrimethyl trimethacrylate | 3290-92-4 | 1 - 5% | Yes |
| Zinc oxide | 1314-13-2 | 1 - 5% | Yes |
| 4,4'-isopropylidenediphenol-, polymer with (chloromethyl)oxirane, acrylate | 55818-57-0 | 1 - 5% | Yes |
| Quartz (SiO2) respirable particulates (RCS) >=10% | 14808-60-7 | 0.1 - 1% | Yes |
IDH number: 2484340 Product name: TEROSON EV 11007 2X30X30
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Fresh air, oxygen supply, warmth; seek specialist medical attention. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. Obtain medical attention if irritation persists.
Rinse immediately with plenty of running water (for 10 minutes). Seek medical attention if necessary. If symptoms develop and persist, get medical attention.
Rinse out mouth, drink 1-2 glasses of water, do not induce vomiting. Get immediate medical attention.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
This product is combustible at high temperatures.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Wear appropriate protective equipment and clothing during clean-up. Do not empty into drains / surface water / ground water.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
"Empty" containers retain product residue (liquid and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static electricity, or other sources of ignition; they may explode. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Use only with adequate ventilation. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Do not expose such containers to heat, flame, sparks, static electricity, or other sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, spark and flame. Keep away from alkalis. Avoid strong oxidizing agents.
This product may react with oxidizing agents. Reaction with some curing agents may produce considerable heat. Run-a-way cure reactions (polymerization) may char and decompose the resin system. Fumes and vapors from these thermal and chemical decompositions vary widely in composition and toxicity. This product may react with strong reducing agents.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON EV 11007 2X30X30?
The signal word is danger.
What is the physical form of TEROSON EV 11007 2X30X30?
TEROSON EV 11007 2X30X30 is a solid with gray color.
What is TEROSON EV 11007 2X30X30 used for?
Sealant
What are the hazard statements for TEROSON EV 11007 2X30X30?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H350: MAY CAUSE CANCER.
What is the melting point of TEROSON EV 11007 2X30X30?
The melting point is Not available. and the boiling point is Not determined.