Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE PC 9462 20.5LB PT B
- Product Code
- 2091183_1284154
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N,N'-bis(3-aminopropyl)ethylenediamine | 10563-26-5 | 60 - 80% | No |
| salicylic acid | 69-72-7 | 5 - 10% | No |
| N-(2-aminoethyl)-1,3-propanediamine | 13531-52-7 | 5 - 10% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Burning produces obnoxious and toxic fumes.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Immediately contact emergency personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE PC 9020 L PTB
---
LOCTITE PC 9458 B known as LOCTITE FM FAST GRT 21.4LB PT B
---
LOCTITE DRI LOC 201 20LB PTB
---
LOCTITE 4902 20G
---
LOCTITE PC 7473 A known as LOCTITE NDBK F/C PW 25LB PT A
---
LOCTITE PC 9660 AE12FO
---
LOCTITE PC 7222 Part A
---
LOCTITE DRI-LOC 205 40LB PT A
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not taste or swallow. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Keep container closed.
Store in original container until ready to use. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use local exhaust ventilation if the potential for airborne exposure exists.
Use chemical resistant, impermeable clothing including gloves
Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists.
Use a NIOSH approved respirator if ventilation is inadequate.
Use chemical resistant, impermeable clothing including gloves and either an apron or body suit to prevent skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
Reducing agents. Organic acids. Mineral acids. Sodium hypochlorite. Peroxides. Oxidizing agents. This product slowly corrodes copper, aluminum, zinc and galvanized surfaces.
Oxides of carbon. Oxides of nitrogen. Ammonia. Nitric acid. Organic acids. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2922
- Shipping Name
- Corrosive liquid, toxic, n.o.s. (N,N'-Bis(3-aminopropyl)ethylenediamine)
- Transport Class
- 8 (6.1)
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE PC 9462 20.5LB PT B?
The signal word is danger.
What is the physical form of LOCTITE PC 9462 20.5LB PT B?
LOCTITE PC 9462 20.5LB PT B is a liquid with blue color. It has amine odor.
What is the solubility of LOCTITE PC 9462 20.5LB PT B?
Soluble
What are the hazard statements for LOCTITE PC 9462 20.5LB PT B?
This substance has 3 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H311: TOXIC IN CONTACT WITH SKIN.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of LOCTITE PC 9462 20.5LB PT B?
The melting point is Not available. and the boiling point is 314 °C (597.2 °F).