Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE PC 9660 AE12FO
- Product Form
- Coating
- Product Code
- 51211
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated light | 64742-47-8 | 30 - 60% | Yes |
| propane | 74-98-6 | 10 - 30% | Yes |
| n-Hexane | 110-54-3 | 10 - 30% | Yes |
| Naphtha, petroleum, hydrotreated light | 64742-49-0 | 5 - 10% | Yes |
| n-Heptane | 142-82-5 | 1 - 5% | Yes |
| Methylcyclopentane | 96-37-7 | 1 - 5% | Yes |
| 2-Butoxyethanol | 111-76-2 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
Do not induce vomiting. If vomiting occurs, prevent aspiration by keeping the patient's head below the knees. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat. Vapor accumulation can flash or explode if ignited.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Remove all sources of ignition. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material. Store in a closed container until ready for disposal.
Materials: Inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed.
Keep in a cool, well ventilated area.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Heat, flames, sparks and other sources of ignition. Do not puncture, incinerate, or expose to temperatures above 48.9 °C (120 °F). Store away from incompatible materials.
Strong oxidizing agents.
Oxides of carbon. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- Aerosols
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE PC 9660 AE12FO?
The signal word is danger.
What is the physical form of LOCTITE PC 9660 AE12FO?
LOCTITE PC 9660 AE12FO is a aerosol with brown color. It has hydrocarbons odor.
What is the solubility of LOCTITE PC 9660 AE12FO?
Insoluble Water
What are the hazard statements for LOCTITE PC 9660 AE12FO?
This substance has 6 hazard statements:
- H223: FLAMMABLE AEROSOL
- H229: PRESSURIZED CONTAINER: MAY BURST IF HEATED
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS
- H315: CAUSES SKIN IRRITATION
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE
What is the melting point of LOCTITE PC 9660 AE12FO?
The melting point is Not available. and the boiling point is 7 °C (44.6 °F).