Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE C-MC 21130 MAINTENANCE CLEANER
- Synonyms
- Bonderite C-MC 21130 KN25KG
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaners for Industrial Application
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Dimethyl sulfoxide | 67-68-5 | 10 - 30% | Yes |
| Propylene carbonate | 108-32-7 | 10 - 30% | Yes |
| (2-Methoxymethylethoxy)propanol | 34590-94-8 | 10 - 30% | Yes |
| Ethyl 3-ethoxypropionate | 763-69-9 | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE C-MC MC-97 MAINTENANCE CLEANER
---
BONDERITE C-MC A-300 MAINTENANCE CLEANER
---
BONDERITE C-MC AQUAPREP MAINTENANCE CLEANER
---
BONDERITE C-MC AQUAPREP MAINTENANCE CLEANER
---
BONDERITE C-MC 200 ALKALINE MAINTENANCE CLEANER
---
BONDERITE C-MC 2235 MAINT. CLEANER known as PARCO MAINTENANCE CLEANER 2235
---
BONDERITE C-MC 5884 AERO MAINTENANCE CLEANER JC4.5KG
---
BONDERITE C-IC 110 ACID CLEANER
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not breathe gas/fumes/vapor/spray. Do not take internally.
Store at or below < 90 °F (< 32.2 °C). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Remove all sources of ignition. Ground and bond metal containers for liquid transfer to avoid static sparks.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Not available.
Not available.
None under normal processing.
Heat, flames, sparks and other sources of ignition.
This product may react with strong oxidizing agents.
Not available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- NA 1993
- Shipping Name
- Combustible liquid, n.o.s. (Dipropyleneglycol monomethylether)
- Transport Class
- Combustible Liquid
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE C-MC 21130 MAINTENANCE CLEANER known by?
BONDERITE C-MC 21130 MAINTENANCE CLEANER is also known as: Bonderite C-MC 21130 KN25KG
What is the hazard signal word for BONDERITE C-MC 21130 MAINTENANCE CLEANER?
The signal word is warning.
What is the physical form of BONDERITE C-MC 21130 MAINTENANCE CLEANER?
BONDERITE C-MC 21130 MAINTENANCE CLEANER is a liquid with colourless / colorless to yellow color. It has characteristic odor.
What is the solubility of BONDERITE C-MC 21130 MAINTENANCE CLEANER?
Partially miscible Water
What is BONDERITE C-MC 21130 MAINTENANCE CLEANER used for?
Cleaners for Industrial Application
What are the hazard statements for BONDERITE C-MC 21130 MAINTENANCE CLEANER?
This substance has 4 hazard statements:
- H227: COMBUSTIBLE LIQUID.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of BONDERITE C-MC 21130 MAINTENANCE CLEANER?
The melting point is Not applicable, Product is a liquid and the boiling point is > 100 °C (> 212°F).