Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FM 5011U FORMING LUBRICANT
- Product Code
- 1416264
- Synonyms
- PTD-5011-U
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coating
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy naphthenic | 64742-52-5 | 60 - 80% | Yes |
| Phosphate Ester | --- | 5 - 10% | Yes |
IDH number: 1416264 Product name: BONDERITE L-FM 5011U FORMING LUBRICANT known as PTD-5011-U
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air.
Immediately wash skin thoroughly with soap and water.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.
Do not induce vomiting.
Immediate Medical Attention
If symptoms develop and persist, get medical attention. In case of contact with the eyes, seek immediate medical attention. For ingestion, get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-FM 560 FORMING LUBRICANT
---
BONDERITE L-FM 235 FORMING LUBRICANT ACHESON
---
BONDERITE L-FM F 1009 FORMING LUBRICANT ACHESON
---
BONDERITE L-FM 909 R FORMING LUBRICANT ACHESON
---
BONDERITE L-FM F P 1212 AN STAMPING LUBRICANT
---
BONDERITE L-FM F P 1212 AN STAMPING LUBRICANT
---
BONDERITE L-FM T 4400 FORMING LUBRICANT ACHESON known as BONDERLUBE T 44 00
---
BONDERITE L-FM 243 FORMING LUBRICANT ACHESON known as BONDERLUBE 243
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong acids or oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE L-FM 5011U FORMING LUBRICANT known by?
BONDERITE L-FM 5011U FORMING LUBRICANT is also known as: PTD-5011-U
What is the hazard signal word for BONDERITE L-FM 5011U FORMING LUBRICANT?
The signal word is no signal word.
What is the physical form of BONDERITE L-FM 5011U FORMING LUBRICANT?
BONDERITE L-FM 5011U FORMING LUBRICANT is a liquid with dark brown color. It has neutral odor.
What is the solubility of BONDERITE L-FM 5011U FORMING LUBRICANT?
Slight
What is BONDERITE L-FM 5011U FORMING LUBRICANT used for?
Coating
What is the melting point of BONDERITE L-FM 5011U FORMING LUBRICANT?
The melting point is Not available. and the boiling point is >100.0 °C (>212°F) None.