Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FM 909 R FORMING LUBRICANT ACHESON
- Synonyms
- REACTOBOND 909 REPL
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Corrosion Protection Agents for Metals
Manufacturers & Suppliers
Henkel
manufacturer
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Oleic acid | 112-80-1 | 10 - 30% | Yes |
| Distillates (petroleum), hydrotreated heavy naphthenic | 64742-52-5 | 30 - 60% | Yes |
| Residual oils (petroleum), solvent-refined | 64742-01-4 | 10 - 30% | Yes |
| Phosphoric acid | 7664-38-2 | 1 - 5% | Yes |
| Linoleic acid | 60-33-3 | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Remove contaminated clothing and footwear. For skin contact, flush with large amounts of water. Seek immediate medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek immediate medical attention for skin and eye contact, or if inhalation symptoms develop or persist.
Medical Treatment
This material, if aspirated into the lungs, may cause lipoid pneumonitis. Treat affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
This product is combustible at high temperatures.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Surfaces may become slippery after spillage.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-FM F 1009 FORMING LUBRICANT ACHESON
---
BONDERITE L-FM 235 FORMING LUBRICANT ACHESON
---
BONDERITE L-FM PL-A POST LUBRICANT ACHESON
---
BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON
---
BONDERITE L-FM 8100-A POST LUBRICANT ACHESON
---
BONDERITE L-FM 8100-A POST LUBRICANT ACHESON
---
BONDERITE L-FG 1105 SYNTHETIC FORGING LUBRICANT ACHESON
---
BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid the generation of oil mists. Provide adequate ventilation. Wash thoroughly after handling. Do not take internally.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing.
Wash thoroughly after handling.
Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static electricity, or other sources of ignition; they may explode.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
This product may react with oxidizing agents. This product may react with strong alkalies.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE L-FM 909 R FORMING LUBRICANT ACHESON known by?
BONDERITE L-FM 909 R FORMING LUBRICANT ACHESON is also known as: REACTOBOND 909 REPL
What is the hazard signal word for BONDERITE L-FM 909 R FORMING LUBRICANT ACHESON?
The signal word is danger.
What is the physical form of BONDERITE L-FM 909 R FORMING LUBRICANT ACHESON?
BONDERITE L-FM 909 R FORMING LUBRICANT ACHESON is a liquid with dark brown color. It has neutral odor.
What is the solubility of BONDERITE L-FM 909 R FORMING LUBRICANT ACHESON?
Negligible Water
What is BONDERITE L-FM 909 R FORMING LUBRICANT ACHESON used for?
Corrosion Protection Agents for Metals
What are the hazard statements for BONDERITE L-FM 909 R FORMING LUBRICANT ACHESON?
This substance has 1 hazard statement:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of BONDERITE L-FM 909 R FORMING LUBRICANT ACHESON?
The melting point is Not determined and the boiling point is 212 °F (100°C)calculated.