Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-AD 131-H PRETREATMENT ADDITVE known as ACCELERATOR 131-H
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS06
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Remove contaminated clothing and footwear. Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Medical Treatment
Treat symptomatically and supportively. If cyanosis is severe, intravenous injection of methylene blue, 1 mg/kg body weight, may be of value.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
If evaporated to dryness, solid residue is an oxidizing agent and may cause spontaneous ignition of combustible materials.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-AD 110 PRETREATMENT ADDITIVE known as ADDITIVE 110
---
BONDERITE M-AD 315 PRETREATMENT ADDITIVE known as ADDITIVE 315
---
BONDERITE M-AD 1 PRETREATMENT ADDITIVE known as ADDITIVE 1
---
BONDERITE M-AD 301 PRETREATMENT ADDITIVE
---
BONDERITE M-AD 4977B PRETREATMENT ADDITIVE known as ADDITIVE 4977B
---
BONDERITE M-AD A PRETREATMENT ADDITIVE known as ADDITIVE A
---
BONDERITE L-AD 171 ACCELERATOR
---
BONDERITE M-AD 319 PRETREATMENT ADDITIVE known as ADDITIVE 319
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. For industrial use only. Do not take internally. Wash thoroughly after handling. Do not mix this product with material which contain AMINES. NITROSAMINE may be formed.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
This product may react with ammonium compounds and reducing agents, particularly cyanides, thiocyanates and thiosulfates. Sodium nitrite may react with organic amines to form nitrosamines. This product reacts with acids to produce oxides of nitrogen. If evaporated to dryness, dry residue is combustible. Keep away from heat, spark and flame.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Decomposes with heat to produce oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3287
- Shipping Name
- Toxic liquid, inorganic, n.o.s. (Sodium nitrite)
- Transport Class
- 6.1
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-AD 131-H PRETREATMENT ADDITVE known as ACCELERATOR 131-H?
The signal word is danger.
What is the physical form of BONDERITE M-AD 131-H PRETREATMENT ADDITVE known as ACCELERATOR 131-H?
BONDERITE M-AD 131-H PRETREATMENT ADDITVE known as ACCELERATOR 131-H is a liquid with yellow color. It has odourless / odorless odor.
What is the solubility of BONDERITE M-AD 131-H PRETREATMENT ADDITVE known as ACCELERATOR 131-H?
Complete
What is BONDERITE M-AD 131-H PRETREATMENT ADDITVE known as ACCELERATOR 131-H used for?
Additive
What are the hazard statements for BONDERITE M-AD 131-H PRETREATMENT ADDITVE known as ACCELERATOR 131-H?
This substance has 3 hazard statements:
- H272: MAY INTENSIFY FIRE; OXIDIZER.
- H301: TOXIC IF SWALLOWED.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE M-AD 131-H PRETREATMENT ADDITVE known as ACCELERATOR 131-H?
The melting point is -12 °C (10.4 °F) and the boiling point is > 121 °C (> 249.8 °F) Boiling point.