Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-AD 301 PRETREATMENT ADDITIVE
- Synonyms
- ADDITIVE 301 Additive
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
CHEMTREC
1-703-527-3887
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Manganese nitrate | 10377-66-9 | 30 - 60% | Yes |
| Nitric acid | 7697-37-2 | 0.1 - 1% | Yes |
Concentration range is provided to assist users in providing appropriate protections.
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Remove contaminated clothing and footwear. Flush with large amounts of water.
Rinse immediately with plenty of water for 15 minutes.
Do not induce vomiting.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). Seek immediate medical attention (skin, eye, ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses. If evaporated to dryness, solid residue is an oxidizing agent and may cause spontaneous ignition of combustible materials.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Wear appropriate protective equipment and clothing during clean-up. Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-AD 300 PRETREATMENT ADDITIVE
---
BONDERITE M-AD 10 PRETREATMENT ADDITIVE
---
BONDERITE M-AD ZN2 PRETREATMENT ADDITIVE DR302KG
---
BONDERITE M-AD 1 PRETREATMENT ADDITIVE known as ADDITIVE 1
---
BONDERITE M-AD A PRETREATMENT ADDITIVE known as ADDITIVE A
---
BONDERITE M-AD 319 PRETREATMENT ADDITIVE known as ADDITIVE 319
---
BONDERITE M-AD 315 PRETREATMENT ADDITIVE known as ADDITIVE 315
---
BONDERITE M-AD 338 PRETREATMENT ADDITIVE DR215KG
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Do not take internally. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Store away from incompatible materials.
This product may react with strong alkalies.
Decomposes with heat to produce oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- Corrosive liquid, acidic, inorganic, n.o.s. (Nitric acid)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE M-AD 301 PRETREATMENT ADDITIVE known by?
BONDERITE M-AD 301 PRETREATMENT ADDITIVE is also known as: ADDITIVE 301 Additive
What is the hazard signal word for BONDERITE M-AD 301 PRETREATMENT ADDITIVE?
The signal word is danger.
What is the physical form of BONDERITE M-AD 301 PRETREATMENT ADDITIVE?
BONDERITE M-AD 301 PRETREATMENT ADDITIVE is a liquid with pink color. It has sour/acid odor.
What is the solubility of BONDERITE M-AD 301 PRETREATMENT ADDITIVE?
Complete
What is BONDERITE M-AD 301 PRETREATMENT ADDITIVE used for?
None identified
What are the hazard statements for BONDERITE M-AD 301 PRETREATMENT ADDITIVE?
This substance has 5 hazard statements:
- H272: MAY INTENSIFY FIRE; OXIDIZER.
- H302: HARMFUL IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
- H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE M-AD 301 PRETREATMENT ADDITIVE?
The melting point is Not available. and the boiling point is > 210 °F (> 98.9 °C) Boiling point.