NextSDS Logo
Safety Data Sheet EN

TEROSON RB VII 20X2 LR130M

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON RB VII 20X2 LR130M
Product Form
Sealant
Product Code
2670826

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Irrit. Cat. 2A
Carc. Cat. 1A
STOT SE Cat. 3
STOT RE Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H319 CAUSES SERIOUS EYE IRRITATION.
H335 MAY CAUSE RESPIRATORY IRRITATION.
H350 MAY CAUSE CANCER.
H372 CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P260 Do not breathe dust.
P264 Wash affected area thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves, clothing, eye and face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Limestone 1317-65-3 30 - 60% Yes
Talc 14807-96-6 10 - 30% Yes
Lubricating oils (petroleum), C15-30, hydrotreated neutral oil-based, <3 % DMSO extract 72623-86-0 1 - 5% Yes
Barite (Ba(SO4)) 13462-86-7 5 - 10% Yes
Titanium dioxide < 1% particles with diameter ≤ 10 μm 13463-67-7 1 - 5% Yes
Quartz (SiO2), <1% respirable 14808-60-7 1 - 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.

Skin contact

Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get immediate medical attention. Do not induce vomiting.

Immediate Medical Attention

Get immediate medical attention for eye contact and ingestion. For inhalation and skin contact, get medical attention if symptoms develop and persist.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

In case of fire toxic gases can be released.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.

Cleanup methods

Scrape up spilled material and place in a closed container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not breathe fumes or dust from this material. For industrial use only. Do not take internally.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Voc Content
Not available.
Decomposition Temperature
Not available.
Density
---
Kinematic Viscosity
Not available.
Ph
Not applicable, Product is non-soluble (in water).
Cloud Point
---
Colour Intensity
---
Boiling Point
Not applicable, Decomposes before boiling point is reached
Odor
Odourless / Odorless
Lower Explosive Limit
Not available.
Flash Point
Not applicable
Properties Status
---
Physical State Data
solid
Flammability
The product is not flammable.
Dynamic Viscosity
Not available.
Vapor Density
---
Upper Explosive Limit
Not available.
Odor Threshold
Not available.
State Under Standard Conditions
---
Metal Corrosion
---
Melting Point
Not applicable, Determination technically not possible
Softening Point
---
Freezing Point
---
Relative Evaporation Rate
---
Bulk Density
---
Solubility In Water
Insoluble
Solidification Point
---
Physical State
Solid
Explosive Limits
---
Appearance
---
Solubility In Fat
---
Evaporation Rate
Not available.
Solubility
Insoluble
Crystallisation Point
---
Molecular Weight
---
Auto Ignition Temperature
Not available.
Vapor Pressure
< 0.1 hPa (20 °C (68°F))
Form
---
Colour
White
Partition Coefficient
Not available.
Relative Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

None if used for intended purpose.

Incompatible

None if used properly.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON RB VII 20X2 LR130M?

The signal word is danger.

What is the physical form of TEROSON RB VII 20X2 LR130M?

TEROSON RB VII 20X2 LR130M is a solid with white color. It has odourless / odorless odor.

What is the solubility of TEROSON RB VII 20X2 LR130M?

Insoluble

What are the hazard statements for TEROSON RB VII 20X2 LR130M?

This substance has 4 hazard statements:

  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H335: MAY CAUSE RESPIRATORY IRRITATION.
  • H350: MAY CAUSE CANCER.
  • H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

What is the melting point of TEROSON RB VII 20X2 LR130M?

The melting point is Not applicable, Determination technically not possible and the boiling point is Not applicable, Decomposes before boiling point is reached.