NextSDS Logo
Safety Data Sheet EN

TEROSON RB 2702 DR132KG

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON RB 2702 DR132KG
Product Code
3049054

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Adhesive

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Dam. Cat. 1
Carc. Cat. 1A

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H318 CAUSES SERIOUS EYE DAMAGE.
H350 MAY CAUSE CANCER.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, clothing, eye and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P332 + P313 If skin irritation occurs: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Limestone 1317-65-3 30 - 60% Yes
Distillates (petroleum), solvent-dewaxed heavy paraffinic < 3%DMSO 64742-65-0 10 - 30% Yes
Styrene butadiene divinylbenzene copolymer 26471-45-4 5 - 10% Yes
Aluminium oxide - non fibrous form 1344-28-1 5 - 10% Yes
Calcium oxide 1305-78-8 1 - 5% Yes
Distillates (petroleum), solvent-dewaxed light paraffinic (not cmr) 64742-56-9 1 - 5% Yes
Quartz (SiO2) respirable particulates (RCS) >=10% 14808-60-7 0.1 - 1% Yes
Titanium dioxide 13463-67-7 0.1 - 1% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air.

Skin contact

Immediately wash skin thoroughly with soap and water.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.

Ingestion

Do not induce vomiting.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Do not take internally. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Voc Content
0.02 lb/gal
Relative Density
---
Dynamic Viscosity
3,742,000 mPa.s
Solubility In Water
---
State Under Standard Conditions
---
Partition Coefficient
Not available.
Softening Point
---
Solidification Point
---
Density
1.33
Melting Point
Not applicable
Physical State
Liquid
Physical State Data
liquid
Colour
Beige
Freezing Point
---
Molecular Weight
---
Colour Intensity
---
Cloud Point
---
Solubility In Fat
---
Auto Ignition Temperature
Not available.
Properties Status
---
Appearance
---
Flammability
Not applicable
Evaporation Rate
Not available.
Metal Corrosion
---
Decomposition Temperature
Not available.
Solubility
Negligible
Odor
Neutral
Lower Explosive Limit
Not available.
Vapor Pressure
Not applicable
Bulk Density
---
Kinematic Viscosity
Not available.
Flash Point
> 200 °F (> 93.33 °C) Certificate of Supplier
Vapor Density
---
Odor Threshold
Not available.
Crystallisation Point
---
Explosive Limits
---
Boiling Point
> 105 °C (> 221°F) COI ODN 0819A; INITIAL BOILING PT (C), SUPPLIER
Upper Explosive Limit
Not available.
Relative Evaporation Rate
---
Ph
Not applicable
Form
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This product may react with strong oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON RB 2702 DR132KG?

The signal word is danger.

What is the physical form of TEROSON RB 2702 DR132KG?

TEROSON RB 2702 DR132KG is a liquid with beige color. It has neutral odor.

What is the solubility of TEROSON RB 2702 DR132KG?

Negligible

What is TEROSON RB 2702 DR132KG used for?

Adhesive

What are the hazard statements for TEROSON RB 2702 DR132KG?

This substance has 3 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H318: CAUSES SERIOUS EYE DAMAGE.
  • H350: MAY CAUSE CANCER.

What is the melting point of TEROSON RB 2702 DR132KG?

The melting point is Not applicable and the boiling point is > 105 °C (> 221°F) COI ODN 0819A; INITIAL BOILING PT (C), SUPPLIER.