NextSDS Logo
Safety Data Sheet EN

LOCTITE EA 7363 B known as FIXMASTER ANC BLT GRT HP 4.5OZB

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE EA 7363 B known as FIXMASTER ANC BLT GRT HP 4.5OZB
Product Code
1108757_1087990

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Epoxy

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelina.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4
Skin Corr. Cat. 1
Eye Dam. Cat. 1
Skin Sens. Cat. 1
Repr. Cat. 2
STOT RE Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H302 HARMFUL IF SWALLOWED.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H361 SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
H372 CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P260 Do not breathe vapors, mist, or spray.
P264 Wash affected area thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Limestone 1317-65-3 30 - 60% Yes
4-nonylphenol, branched 84852-15-3 10 - 30% Yes
N-Aminoethylpiperazine 140-31-8 10 - 30% Yes
2-Methylpentane-1,5-diamine 15520-10-2 1 - 5% Yes
Quartz (SiO2) respirable particulates (RCS) >=10% 14808-60-7 1 - 5% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

Skin contact

Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get immediate medical attention.

Immediate Medical Attention

Get medical attention.

Medical Treatment

Not available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Instructions

In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Soak up with inert absorbent material. Scrape up as much material as possible.

Materials: sand, silica gel, acid binder, universal binder, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed.

Storage

Store in original container until ready to use. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store away from heat, sparks, flames, or other sources of ignition. Avoid moisture.

Hygiene

Wash thoroughly after handling.

Fire prevention

Store away from heat, sparks, flames, or other sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Fat
---
Kinematic Viscosity
Not available.
Colour Intensity
---
Ph
11.03
Metal Corrosion
---
Lower Explosive Limit
Not available.
Auto Ignition Temperature
Not available.
Crystallisation Point
---
Partition Coefficient
Not available.
Relative Density
1.0
Colour
Black
Vapor Density
---
Evaporation Rate
Not available.
Odor
no valuation
Appearance
---
Properties Status
---
Upper Explosive Limit
Not available.
Density
---
Explosive Limits
---
Flammability
Not applicable
Physical State
Liquid
Form
---
Decomposition Temperature
Not available.
Boiling Point
Not determined
Melting Point
Not available.
Flash Point
128 °C (262.4 °F)
Relative Evaporation Rate
---
Voc Content
7 g/l (value as mixed for use)
Vapor Pressure
Not determined
State Under Standard Conditions
---
Solubility
Insoluble
Physical State Data
liquid
Odor Threshold
Not available.
Bulk Density
---
Softening Point
---
Dynamic Viscosity
Not available.
Solidification Point
---
Cloud Point
---
Molecular Weight
---
Freezing Point
---
Solubility In Water
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Exposure to moisture. Elevated temperatures. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.

Incompatible

Acids. Oxidizing agents. Peroxides.

Decomposition

Oxides of carbon. Oxides of nitrogen. Metal oxide fumes. Irritating vapors. Toxic fumes.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1760
Shipping Name
Corrosive liquid, n.o.s. (Aminoethylpiperazine, Nonylphenol)
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE EA 7363 B known as FIXMASTER ANC BLT GRT HP 4.5OZB?

The signal word is danger.

What is the physical form of LOCTITE EA 7363 B known as FIXMASTER ANC BLT GRT HP 4.5OZB?

LOCTITE EA 7363 B known as FIXMASTER ANC BLT GRT HP 4.5OZB is a liquid with black color. It has no valuation odor.

What is the solubility of LOCTITE EA 7363 B known as FIXMASTER ANC BLT GRT HP 4.5OZB?

Insoluble

What is LOCTITE EA 7363 B known as FIXMASTER ANC BLT GRT HP 4.5OZB used for?

Epoxy

What are the hazard statements for LOCTITE EA 7363 B known as FIXMASTER ANC BLT GRT HP 4.5OZB?

This substance has 5 hazard statements:

  • H302: HARMFUL IF SWALLOWED.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
  • H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

What is the melting point of LOCTITE EA 7363 B known as FIXMASTER ANC BLT GRT HP 4.5OZB?

The melting point is Not available. and the boiling point is Not determined.