NextSDS Logo
Safety Data Sheet EN

LOCTITE SF 8220 known as LOCTITE FIXMASTER FLEX CLEANER

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE SF 8220 known as LOCTITE FIXMASTER FLEX CLEANER
Product Code
702227

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Solvent

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelina.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 3 H226
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H226 FLAMMABLE LIQUID AND VAPOUR.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.

Precautionary Statements

P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P261 Avoid breathing mist/vapours.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P403 + P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
4-Chloro-.alpha.,.alpha.,.alpha.-trifluorotoluene 98-56-6 80 - 100% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

Skin contact

Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If vomiting occurs, prevent aspiration by keeping the patient's head below the knees. Get medical attention.

Immediate Medical Attention

Get medical attention.

Medical Treatment

In case of ingestion, the stomach should be emptied by gastric lavage under qualified medical supervision.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

Closed containers may rupture (due to build up of pressure) when exposed to extreme heat. Vapors may accumulate in low or confined areas, travel considerable distance to source of ignition, and flash back.

Instructions

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Keep unnecessary personnel away. In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.

Environmental

Do not allow product to enter sewer or waterways. Advise authorities if product has entered or may enter sewers, water sources or extensive land areas. Do not flush with water.

Cleanup methods

Soak up with inert absorbent material. Scrape up as much material as possible.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Do not reuse the empty container. Keep container closed.

Storage

Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.

Hygiene

Wash thoroughly after handling. When using, do not eat, drink or smoke.

Fire prevention

Keep away from heat, spark and flame. During use and until all vapors are gone: Keep area ventilated - do not smoke; extinguish all flames, pilot lights, and heaters; turn off stoves, electrical tools and appliances, and any other sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate local exhaust ventilation to maintain worker exposure below exposure limits.

Hands

Use chemical resistant, impermeable clothing including gloves

Eyes

Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists. Safety showers and eye wash stations should be available.

Respiratory

Use a NIOSH approved air-purifying respirator if the potential to exceed established exposure limits exists.

Skin/Body

Use chemical resistant, impermeable clothing including gloves and either an apron or body suit to prevent skin contact.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Clear, Colourless / Colorless
Colour Intensity
---
Form
---
Odor
Napthalenic
Odor Threshold
Not available.
Ph
Not available.
Melting Point
-36 °C (-32.8 °F)
Boiling Point
139 °C (282.2 °F)
Flash Point
42.8 °C (109.04 °F) Tagliabue closed cup
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
0.9 (Butyl acetate = 1)
Vapor Pressure
5.3 mm hg
Vapor Density
---
Relative Density
1.34
Bulk Density
---
Density
---
Flammability
Not applicable
Upper Explosive Limit
10.5 %
Lower Explosive Limit
0.9 %
Explosive Limits
---
Auto Ignition Temperature
>500 °C (932°F)
Decomposition Temperature
Not available.
Solubility
Not available.
Partition Coefficient
3.7
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
Negligible
Metal Corrosion
---
Dynamic Viscosity
Not available.
Kinematic Viscosity
Not available.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Elevated temperatures. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.

Incompatible

Oxidizing agents. Acids.

Decomposition

Toxic fluorides. Toxic chlorides. Oxides of carbon. Irritating vapors.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN2234
Shipping Name
Chlorobenzotrifluorides
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE SF 8220 known as LOCTITE FIXMASTER FLEX CLEANER?

The signal word is warning.

What is the physical form of LOCTITE SF 8220 known as LOCTITE FIXMASTER FLEX CLEANER?

LOCTITE SF 8220 known as LOCTITE FIXMASTER FLEX CLEANER is a liquid with clear, colourless / colorless color. It has napthalenic odor.

What is the solubility of LOCTITE SF 8220 known as LOCTITE FIXMASTER FLEX CLEANER?

Not available.

What is LOCTITE SF 8220 known as LOCTITE FIXMASTER FLEX CLEANER used for?

Solvent

What are the hazard statements for LOCTITE SF 8220 known as LOCTITE FIXMASTER FLEX CLEANER?

This substance has 2 hazard statements:

  • H226: FLAMMABLE LIQUID AND VAPOUR.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.

What is the melting point of LOCTITE SF 8220 known as LOCTITE FIXMASTER FLEX CLEANER?

The melting point is -36 °C (-32.8 °F) and the boiling point is 139 °C (282.2 °F).