NextSDS Logo
Safety Data Sheet EN

LOCTITE LB 8023 TB70ZENFRES

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE LB 8023 TB70ZENFRES
Product Code
1999556

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H318 CAUSES SERIOUS EYE DAMAGE.

Precautionary Statements

P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, eye protection, and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Residual oils (petroleum), solvent-refined, <3% DMSO 64742-01-4 10 - 30% Yes
Calcium oxide 1305-78-8 10 - 30% Yes
Distillates (petroleum), hydrotreated heavy naphthenic 64742-52-5 10 - 30% Yes
Graphite 7782-42-5 10 - 30% Yes
Distillates (petroleum), solvent-refined heavy paraffinic 64741-88-4 10 - 30% Yes
Calcium distearate 1592-23-0 5 - 10% Yes
Calcium dodecylbenzene sulfonate 26264-06-2 1 - 5% Yes
Calcium dihydroxide 1305-62-0 1 - 5% Yes
Benzenesulfonic acid, mono-C16-24-alkyl derivs., calcium salts 70024-69-0 1 - 5% Yes
Benzenesulfonic acid, C10-16-alkyl derivs., calcium salts 68584-23-6 1 - 5% Yes
Sulfonic acids, petroleum, calcium salts 61789-86-4 1 - 5% Yes
Petroleum distillates, hydrotreated, light naphthenic 64742-53-6 0.1 - 1% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration.

Skin contact

Wash with soap and water. Remove contaminated clothing and footwear. Wash clothing before reuse.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.

Ingestion

Keep individual calm. Do not induce vomiting.

Immediate Medical Attention

Get medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide, foam, powder

Unsuitable media

Not available.

Specific hazards

In case of fire, keep containers cool with water spray.

Instructions

Wear a self-contained breathing apparatus with a full face piece operated in pressure-demand or other positive pressure mode.

Firefighter Protection

Wear a self-contained breathing apparatus with a full face piece operated in pressure-demand or other positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Scrape up as much material as possible. Clean residue with soap and water.

Materials: soap and water

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed.

Storage

Keep container closed. Keep in a cool, well ventilated area.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Lower Explosive Limit
Not available.
Partition Coefficient
Not available.
Vapor Pressure
Not available.
Density
1.2648
Flammability
Not applicable
Appearance
---
Physical State Data
liquid
Relative Evaporation Rate
---
Solubility In Water
Insoluble
Flash Point
Not applicable
Crystallisation Point
---
Form
Paste
Bulk Density
---
Vapor Density
---
Melting Point
Not applicable, Product is a liquid
Physical State
Paste
Explosive Limits
---
Evaporation Rate
Not available.
Upper Explosive Limit
Not available.
State Under Standard Conditions
---
Molecular Weight
---
Auto Ignition Temperature
Not available.
Solubility
Insoluble Water
Voc Content
< 3 %; 38.4 g/l EPA Method 24
Odor
Mild
Properties Status
---
Odor Threshold
Not available.
Kinematic Viscosity
Not available.
Softening Point
---
Metal Corrosion
---
Decomposition Temperature
Not available.
Colour Intensity
---
Relative Density
1.2648
Solubility In Fat
---
Ph
Not applicable, Product is non-soluble (in water).
Cloud Point
---
Solidification Point
---
Freezing Point
---
Colour
Black
Dynamic Viscosity
Not available.
Boiling Point
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials. Avoid dust formation.

Incompatible

Strong acids and strong bases. Strong oxidizing agents. Strong reducing agents. Water. Alkalis.

Decomposition

Oxides of carbon. Oxides of nitrogen. Oxides of sulfur. Calcium oxide. Toxic fumes.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE LB 8023 TB70ZENFRES?

The signal word is danger.

What is the physical form of LOCTITE LB 8023 TB70ZENFRES?

LOCTITE LB 8023 TB70ZENFRES is a paste with black color. It has mild odor.

What is the solubility of LOCTITE LB 8023 TB70ZENFRES?

Insoluble Water

What are the hazard statements for LOCTITE LB 8023 TB70ZENFRES?

This substance has 3 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H318: CAUSES SERIOUS EYE DAMAGE.

What is the melting point of LOCTITE LB 8023 TB70ZENFRES?

The melting point is Not applicable, Product is a liquid and the boiling point is Not available..