NextSDS Logo
Safety Data Sheet EN

BONDERITE C-IC 120SS ACCELERATOR ACID CLEANER known as RIDOLINE 120SS ARNOLD

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-IC 120SS ACCELERATOR ACID CLEANER known as RIDOLINE 120SS ARNOLD

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Acidic Cleaner for Industrial Application

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 2
Acute Tox. Cat. 3
Acute Tox. Cat. 1
Skin Corr. Cat. 1
Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS06 - Acute toxicity

GHS06

Hazard Statements

H300 + H310 FATAL IF SWALLOWED OR IN CONTACT WITH SKIN.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
H331 TOXIC IF INHALED.

Precautionary Statements

P261 Avoid breathing mist/vapours.
P262 Do not get in eyes, on skin, or on clothing.
P264 Wash affected area thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P361 + P364 Take off immediately all contaminated clothing and wash it before reuse.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
IF SWALLOWED: Immediately call a POISON CENTER or doctor/ physician. Rinse mouth.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Hydrogen fluoride 7664-39-3 10 - 30% Yes

Concentration range is provided to assist users in providing appropriate protections.

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. If breathing is difficult, give oxygen. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.

Skin contact

Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. GET IMMEDIATE MEDICAL ATTENTION. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.

Eye contact

Immediately flush eyes with soft jet of water or eye rinse solution for at least 15 minutes. Hold eyelid wide-open. Seek a doctor/hospital, eye flushing should continue during transportation to a doctor.

Ingestion

Get immediate medical attention. Do not induce vomiting. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

GET IMMEDIATE MEDICAL ATTENTION. Seek a doctor/hospital.

Medical Treatment

Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Wash thoroughly after handling. Do not take internally. For industrial use only. NEVER ADD WATER TO PRODUCT. For dilutions, add product slowly to water while stirring. Use caution; heat may be generated. IN CASE OF CONTACT OR SUSPICION OF CONTACT, PROMPT MEDICAL ATTENTION IS ABSOLUTELY NECESSARY.

Storage

Store at or above 0 °F (-17.8 °C). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Water
---
Flammability
Not applicable
Properties Status
---
Solidification Point
---
Lower Explosive Limit
Not applicable
Physical State
Liquid
Vapor Pressure
Not determined
Auto Ignition Temperature
Not applicable
Appearance
---
Metal Corrosion
---
Upper Explosive Limit
Not applicable
State Under Standard Conditions
---
Odor Threshold
Not available.
Bulk Density
---
Flash Point
Not applicable
Solubility
Complete Water
Melting Point
-2 °F (-18.9 °C)
Decomposition Temperature
Not available.
Odor
Pungent
Dynamic Viscosity
Not available.
Crystallisation Point
---
Colour
Red
Relative Density
1.05 - 1.10 at 60 °F (15.56 °C)
Explosive Limits
---
Colour Intensity
---
Density
---
Kinematic Viscosity
Not available.
Form
---
Cloud Point
---
Solubility In Fat
---
Molecular Weight
---
Ph
< 1.0
Partition Coefficient
Not determined
Boiling Point
> 100 °C (> 212°F) calculated
Softening Point
---
Freezing Point
---
Physical State Data
liquid
Relative Evaporation Rate
---
Evaporation Rate
Not determined
Vapor Density
---
Voc Content
Not applicable
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

This product may react with strong alkalies. This material will react with glass, concrete, certain metals, silica containing materials, rubber, leather, and many organics.

Hazardous reactions

None under normal processing.

Avoid

Store away from incompatible materials.

Incompatible

Avoid contact with organic materials, oils, greases, and any oxidizable materials.

Decomposition

May liberate hydrogen fluoride.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1790
Shipping Name
Hydrofluoric acid solution
Transport Class
8 (6.1)
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE C-IC 120SS ACCELERATOR ACID CLEANER known as RIDOLINE 120SS ARNOLD?

The signal word is danger.

What is the physical form of BONDERITE C-IC 120SS ACCELERATOR ACID CLEANER known as RIDOLINE 120SS ARNOLD?

BONDERITE C-IC 120SS ACCELERATOR ACID CLEANER known as RIDOLINE 120SS ARNOLD is a liquid with red color. It has pungent odor.

What is the solubility of BONDERITE C-IC 120SS ACCELERATOR ACID CLEANER known as RIDOLINE 120SS ARNOLD?

Complete Water

What is BONDERITE C-IC 120SS ACCELERATOR ACID CLEANER known as RIDOLINE 120SS ARNOLD used for?

Acidic Cleaner for Industrial Application

What are the hazard statements for BONDERITE C-IC 120SS ACCELERATOR ACID CLEANER known as RIDOLINE 120SS ARNOLD?

This substance has 3 hazard statements:

  • H300 + H310: FATAL IF SWALLOWED OR IN CONTACT WITH SKIN.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
  • H331: TOXIC IF INHALED.

What is the melting point of BONDERITE C-IC 120SS ACCELERATOR ACID CLEANER known as RIDOLINE 120SS ARNOLD?

The melting point is -2 °F (-18.9 °C) and the boiling point is > 100 °C (> 212°F) calculated.