NextSDS Logo
Safety Data Sheet EN

BONDERITE L-GP 2404 GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG 2404 15.875 KG *RWE

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE L-GP 2404 GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG 2404 15.875 KG *RWE

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricant

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3
Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Carc. Cat. 2
STOT SE Cat. 3
Asp. Tox. Cat. 1

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 FLAMMABLE LIQUID AND VAPOUR.
H304 MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
H315 CAUSES SKIN IRRITATION.
H319 CAUSES SERIOUS EYE IRRITATION.
H336 MAY CAUSE DROWSINESS OR DIZZINESS.
H351 SUSPECTED OF CAUSING CANCER.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P310 IF SWALLOWED: Immediately call a physician or poison control center.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P331 Do NOT induce vomiting.
P332 + P313 If skin irritation occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Stoddard solvent, <0.1% Benzene 8052-41-3 60 - 80% Yes
1,2,4-Trimethylbenzene 95-63-6 1 - 5% Yes
Naphthalene 91-20-3 0.1 - 1% Yes
Ethylbenzene 100-41-4 0.1 - 1% Yes
Graphite 7782-42-5 5 - 10% Yes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

Immediately wash skin thoroughly with soap and water. Obtain medical attention if irritation persists.

Eye contact

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Ingestion

Get immediate medical attention. Do not induce vomiting.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

Fire and explosion hazards are moderate when this product is exposed to heat or flame. May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear protective equipment. Wear full protective clothing.

Firefighter Protection

Wear protective equipment. Wear full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Do not take internally.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash thoroughly after handling.

Fire prevention

Remove all sources of ignition. Ground and bond all equipment as required (when transferring products). Ground and bond metal containers for liquid transfer to avoid static sparks.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Black
Colour Intensity
---
Form
---
Odor
Mild
Odor Threshold
Not available.
Ph
Not applicable, Product is non-soluble (in water).
Melting Point
Not applicable, Product is a liquid
Boiling Point
157 - 203 °C (314.6 - 397.4 °F) no method / method unknown
Flash Point
38 °C (100.4 °F)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined
Vapor Pressure
2 hPa (20 °C (68°F)) > 5 hPa (50 °C (122°F))
Vapor Density
---
Relative Density
0.83
Bulk Density
---
Density
---
Flammability
Flammable liquid
Upper Explosive Limit
7 %
Lower Explosive Limit
0.6 %
Explosive Limits
---
Auto Ignition Temperature
279.4 °C (534.92 °F)
Decomposition Temperature
Not available.
Solubility
Insoluble Water
Partition Coefficient
Not available.
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
717 g/l (calculated)
Metal Corrosion
---
Dynamic Viscosity
5 - 50 cp
Kinematic Viscosity
< 20.5 mm2/s
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

Strong acids, alkalies and oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1268
Shipping Name
Petroleum distillates, n.o.s.
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE L-GP 2404 GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG 2404 15.875 KG *RWE?

The signal word is danger.

What is the physical form of BONDERITE L-GP 2404 GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG 2404 15.875 KG *RWE?

BONDERITE L-GP 2404 GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG 2404 15.875 KG *RWE is a liquid with black color. It has mild odor.

What is the solubility of BONDERITE L-GP 2404 GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG 2404 15.875 KG *RWE?

Insoluble Water

What is BONDERITE L-GP 2404 GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG 2404 15.875 KG *RWE used for?

Lubricant

What are the hazard statements for BONDERITE L-GP 2404 GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG 2404 15.875 KG *RWE?

This substance has 6 hazard statements:

  • H226: FLAMMABLE LIQUID AND VAPOUR.
  • H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
  • H315: CAUSES SKIN IRRITATION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H336: MAY CAUSE DROWSINESS OR DIZZINESS.
  • H351: SUSPECTED OF CAUSING CANCER.

What is the melting point of BONDERITE L-GP 2404 GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG 2404 15.875 KG *RWE?

The melting point is Not applicable, Product is a liquid and the boiling point is 157 - 203 °C (314.6 - 397.4 °F) no method / method unknown.