Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-GP 2412 GRAPHITE DISPERSION IN SOLVENT ACHESON
- Synonyms
- DAG2412
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Immediately wash skin thoroughly with soap and water.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open.
Do not induce vomiting.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation/skin), seek medical attention at once (eye), get immediate medical attention (ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
DANGEROUS when exposed to heat or flame. This material can be ignited by flame or spark under all normal atmospheric conditions. Vapors are heavier than air and may travel to ignition sources and flash back.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-GP 2420 GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG2420
---
BONDERITE L-GP 156 GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG156
---
BONDERITE L-GP 2404 ACHESON GRAPHITE DISPERSION IN SOLVENT known as DAG2404
---
BONDERITE L-GP 156 GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG 156
---
BONDERITE L-GP 154N ACHESON GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG 154N
---
BONDERITE L-GP 156 GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG 156 0.39 KG (ED)
---
BONDERITE L-GP 2404 GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG 2404 15.875 KG *RWE
---
BONDERITE L-GP 154 RFU GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG154RFU
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Use only with adequate ventilation. Avoid breathing vapors or mists of this product. Keep away from heat, spark and flame. Ground and bond all equipment as required (when transferring products). Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame.
Wash thoroughly after handling.
Keep away from heat, spark and flame. Ground and bond all equipment as required (when transferring products).
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Heat, flames, sparks and other sources of ignition.
This product may react with strong oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1268
- Shipping Name
- Petroleum products, n.o.s.
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE L-GP 2412 GRAPHITE DISPERSION IN SOLVENT ACHESON known by?
BONDERITE L-GP 2412 GRAPHITE DISPERSION IN SOLVENT ACHESON is also known as: DAG2412
What is the hazard signal word for BONDERITE L-GP 2412 GRAPHITE DISPERSION IN SOLVENT ACHESON?
The signal word is danger.
What is the physical form of BONDERITE L-GP 2412 GRAPHITE DISPERSION IN SOLVENT ACHESON?
BONDERITE L-GP 2412 GRAPHITE DISPERSION IN SOLVENT ACHESON is a liquid with black color. It has mild odor.
What is the solubility of BONDERITE L-GP 2412 GRAPHITE DISPERSION IN SOLVENT ACHESON?
Insoluble Water
What is BONDERITE L-GP 2412 GRAPHITE DISPERSION IN SOLVENT ACHESON used for?
Lubricant
What are the hazard statements for BONDERITE L-GP 2412 GRAPHITE DISPERSION IN SOLVENT ACHESON?
This substance has 6 hazard statements:
- H226: FLAMMABLE LIQUID AND VAPOUR.
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
- H351: SUSPECTED OF CAUSING CANCER.
What is the melting point of BONDERITE L-GP 2412 GRAPHITE DISPERSION IN SOLVENT ACHESON?
The melting point is Not available. and the boiling point is 157 - 203 °C (314.6 - 397.4 °F).