Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE AA 332 MAGNET BONDER known as Loctite(R) 332 Structural Adhe
- Product Code
- 232741
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Cyclohexyl methacrylate | 101-43-9 | 30 - 60% | Yes |
| methacrylic acid | 79-41-4 | 5 - 10% | Yes |
| Silica, amorphous, fumed, cryst.-free | 112945-52-5 | 1 - 5% | Yes |
| 1,3-Butylene glycol dimethacrylate | 1189-08-8 | 1 - 5% | Yes |
| Acrylic acid | 79-10-7 | 1 - 5% | Yes |
| Tert-butyl perbenzoate | 614-45-9 | 0.1 - 1% | Yes |
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention.
Immediately wash skin thoroughly with soap and water. Remove contaminated clothing and footwear. Get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers. Vapors may travel considerable distance to source of ignition and flash back.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material. Scrape up as much material as possible.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
LOCTITE AA 3270 STRUCTURAL ADH known as Loctite(R) 3270 Adhesive Low V
---
LOCTITE AA 330
---
LOCTITE AA 326 STRUCTURAL ADH known as 326 SPEEDBONDER 50ML EN/JP/CH
---
LOCTITE AA H3300 B STRUCTRURAL ADHESIVE known as SPDBNDR H3300 PART B 40 LB PA
---
LOCTITE AA 3504 LC known as Loctite 3504
---
LOCTITE PC 7257 known as LOCTITE FIX MAGNACRETE SS
---
LOCTITE 414 SUPER BONDER BTL
---
LOCTITE AA 3926 LC
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Do not taste or swallow.
Store at or below 38 °C (100.4 °F). Keep in a cool, well ventilated area away from heat, sparks and open flame.
Wash thoroughly after handling.
Make sure containers are properly grounded before use or transfer of material. Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
Heat, flames, sparks and other sources of ignition. Freezing conditions. Store away from incompatible materials. Direct sunlight. UV light. Loss of polymerization inhibitor. Inert gas blanketing. Moisture.
Strong oxidizing agents. Strong reducing agents. Free radical initiators. Oxygen scavengers. Acids and bases. Heavy metals.
Oxides of carbon. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- NA 1993
- Shipping Name
- Combustible liquid, n.o.s. (Methylacrylic acid)
- Transport Class
- Combustible Liquid
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE AA 332 MAGNET BONDER known as Loctite(R) 332 Structural Adhe?
The signal word is danger.
What is the physical form of LOCTITE AA 332 MAGNET BONDER known as Loctite(R) 332 Structural Adhe?
LOCTITE AA 332 MAGNET BONDER known as Loctite(R) 332 Structural Adhe is a liquid with opaque, light yellow, dark amber color. It has characteristic odor.
What is the solubility of LOCTITE AA 332 MAGNET BONDER known as Loctite(R) 332 Structural Adhe?
Not available.
What is LOCTITE AA 332 MAGNET BONDER known as Loctite(R) 332 Structural Adhe used for?
Adhesive
What are the hazard statements for LOCTITE AA 332 MAGNET BONDER known as Loctite(R) 332 Structural Adhe?
This substance has 4 hazard statements:
- H227: COMBUSTIBLE LIQUID
- H315: CAUSES SKIN IRRITATION
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION
- H318: CAUSES SERIOUS EYE DAMAGE
What is the melting point of LOCTITE AA 332 MAGNET BONDER known as Loctite(R) 332 Structural Adhe?
The melting point is Not available. and the boiling point is Not available..