Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE AA 330
- Product Code
- 142572
- Synonyms
- Loctite 330
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Acrylic Adhesive
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tetrahydrofurfuryl methacrylate | 2455-24-5 | 30 - 60% | Yes |
| methacrylic acid | 79-41-4 | 5 - 10% | Yes |
| 2-Ethylhexyl methacrylate | 688-84-6 | 5 - 10% | Yes |
| 1,3-Butylene glycol dimethacrylate | 1189-08-8 | 1 - 5% | Yes |
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 0.1 - 1% | Yes |
| Methyl methacrylate | 80-62-6 | 0.1 - 1% | Yes |
| Cumene hydroperoxide | 80-15-9 | 0.1 - 1% | Yes |
Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse. Get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up as much material as possible.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Do not taste or swallow.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Wash thoroughly after handling.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
Keep away from heat, ignition sources and incompatible materials. Extremes of temperature and direct sunlight. UV light. Freezing conditions.
Strong oxidizing agents. Strong reducing agents. Strong acids. Alkalis. Free radical initiators. Oxygen scavengers.
Oxides of carbon. Oxides of sulfur. Toxic chlorides. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is LOCTITE AA 330 known by?
LOCTITE AA 330 is also known as: Loctite 330
What is the hazard signal word for LOCTITE AA 330?
The signal word is danger.
What is the physical form of LOCTITE AA 330?
LOCTITE AA 330 is a liquid with amber color. It has pungent, irritating odor.
What is the solubility of LOCTITE AA 330?
Slight Water
What is LOCTITE AA 330 used for?
Acrylic Adhesive
What are the hazard statements for LOCTITE AA 330?
This substance has 6 hazard statements:
- H227: COMBUSTIBLE LIQUID
- H315: CAUSES SKIN IRRITATION
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION
- H318: CAUSES SERIOUS EYE DAMAGE
- H335: MAY CAUSE RESPIRATORY IRRITATION
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD
What is the melting point of LOCTITE AA 330?
The melting point is Not applicable, Product is a liquid and the boiling point is > 148.9 °C (> 300°F).