Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE C-AD E2052 B
- Product Code
- 2932921
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Hazardous Component(s) | CAS Number | Weight %* |
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alcohols, C9-11, branched and linear, ethoxylated~ | 160901-09-7 | 5 - 10% | Yes |
| Ethylene oxide-propylene oxide copolymer monoether with 2-propyl-1-heptanol | 166736-08-9 | 5 - 10% | Yes |
| Alcohols, C12-14-secondary, 7EO | 84133-50-6 | 5 - 10% | Yes |
| Mineral oil, polyethylene glycol based surfactant, fatty acid amide & others | --- | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Wash affected area immediately with soap and water. Obtain medical attention if irritation persists.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture and although it will exhibit a flash point, it will not support combustion.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Wear appropriate protective equipment and clothing during clean-up. Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only. Launder work clothes frequently.
store between 5 °C (41°F) and 40 °C (104°F)
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product.
Wear impervious gloves for prolonged contact.
Wear chemical goggles; face shield (if splashing is possible).
If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Store away from incompatible materials.
Strong oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE C-AD E2052 B?
The signal word is danger.
What is the physical form of BONDERITE C-AD E2052 B?
BONDERITE C-AD E2052 B is a liquid with white color. It has neutral odor.
What is the solubility of BONDERITE C-AD E2052 B?
Complete Water
What are the hazard statements for BONDERITE C-AD E2052 B?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H318: CAUSES SERIOUS EYE DAMAGE.
What is the melting point of BONDERITE C-AD E2052 B?
The melting point is Not determined and the boiling point is Not determined.