NextSDS Logo
Safety Data Sheet EN

BONDERITE C-AD 2001LB

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-AD 2001LB
Product Code
772244
Synonyms
PARCO CLEANER 2001LB

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaner

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H318 CAUSES SERIOUS EYE DAMAGE.

Precautionary Statements

P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, eye protection, and face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313 If skin irritation occurs: Get medical attention.
P352 IF ON SKIN: Wash with plenty of water.
P362 Take off contaminated clothing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Decyl alcohol, propoxylated, ethoxylated 37251-67-5 30 - 40% Yes

IDH number: 772244 Product name: BONDERITE C-AD 2001LB SURFACTANT ADDITIVE known as PARCO CLEANER 2001LB

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If symptoms are experienced, remove source of contamination or move victim to fresh air. If symptoms develop and persist, get medical attention.

Skin contact

For skin contact flush with large amounts of water. If symptoms develop and persist, get medical attention.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.

Ingestion

Get immediate medical attention. Do not induce vomiting.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Specific hazards

This product is combustible at high temperatures.

Instructions

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Wash thoroughly after handling. Do not take internally.

Storage

For safe storage, store between 35 °F (1.7 °C) and 100 °F (37.8 °C) If stored outside of this range, mix well before using.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Amber
Colour Intensity
---
Form
---
Odor
Ammoniacal
Odor Threshold
Not available.
Ph
8.5 - 9.9
Melting Point
Not determined
Boiling Point
225 °F (107.2 °C) calculated
Flash Point
> 450 °F (> 232.22 °C) calculated
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available.
Vapor Pressure
Not applicable
Vapor Density
Not applicable
Relative Density
1.00 - 1.06
Bulk Density
---
Density
---
Flammability
Not applicable
Upper Explosive Limit
Not applicable
Lower Explosive Limit
Not applicable
Explosive Limits
---
Auto Ignition Temperature
Not applicable
Decomposition Temperature
Not available.
Solubility
---
Partition Coefficient
Not determined
Solubility In Water
Complete
Solubility In Fat
---
Molecular Weight
---
Voc Content
Not available.
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Store away from incompatible materials.

Incompatible

This product may react with strong acids or oxidizing agents. Reaction with reducing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is BONDERITE C-AD 2001LB known by?

BONDERITE C-AD 2001LB is also known as: PARCO CLEANER 2001LB

What is the hazard signal word for BONDERITE C-AD 2001LB?

The signal word is danger.

What is the physical form of BONDERITE C-AD 2001LB?

BONDERITE C-AD 2001LB is a liquid with amber color. It has ammoniacal odor.

What is BONDERITE C-AD 2001LB used for?

Cleaner

What are the hazard statements for BONDERITE C-AD 2001LB?

This substance has 2 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H318: CAUSES SERIOUS EYE DAMAGE.

What is the melting point of BONDERITE C-AD 2001LB?

The melting point is Not determined and the boiling point is 225 °F (107.2 °C) calculated.