Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK 8200TI known as Ablebond 8200TI (18.5g)
- Product Code
- 1204734
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Die attach adhesive
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silver | 7440-22-4 | 80 - 100% | No |
| High boiling methacrylate | --- | 10 - 30% | No |
| Polybutadiene diacrylate | --- | 5 - 10% | No |
| Substituted silane | --- | 0.1 - 1% | No |
IDH number: 1204734 Product name: LOCTITE ABLESTIK 8200TI known as Ablebond 8200TI (18.5g)
First Aid Measures
Emergency procedures for chemical exposure incidents
If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.
Rinse with running water and soap. Remove contaminated clothing and shoes. If symptoms develop and persist, get medical attention. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.
Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Seek medical attention immediately (Eye contact). Seek immediate medical attention (Ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material. Scrape up spilled material and place in a closed container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK 8200T known as Ablebond 8200T (32g)
---
LOCTITE ABLESTIK 8351C known as Ablebond 8351C (17.5g)
---
LOCTITE ABLESTIK 8388A known as Ablebond 8388A (18g)
---
LOCTITE ABLESTIK 8175H known as Ablebond 8175H (113.2g)
---
LOCTITE ABLESTIK 8360 known as Ablebond 8360 (8.5g)
---
LOCTITE ABLESTIK 8175 known as Ablebond 8175 (5011) (20g)
---
LOCTITE ABLESTIK 8390 known as Ablebond 8390 (34g)
---
LOCTITE ABLESTIK 8370C known as Ablebond 8370C (6.8g)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed. See Section 8 of the SDS for Personal Protective Equipment.
store at or below -40 °C (-40°F) Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame. Protect from direct sunlight. Store in original container until ready to use. Maintain head space in storage containers to support oxygen requirements of the inhibitor(s).
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. Loss of dissolved air. Loss of polymerization inhibitor.
Strong oxidizing agents. Strong acids and strong bases. Ammonia. Peroxides.
Oxides of carbon. Oxides of Metals in Section 3. Toxic fumes. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- RQ, Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK 8200TI known as Ablebond 8200TI (18.5g)?
The signal word is warning.
What is the physical form of LOCTITE ABLESTIK 8200TI known as Ablebond 8200TI (18.5g)?
LOCTITE ABLESTIK 8200TI known as Ablebond 8200TI (18.5g) is a liquid, paste with silver color. It has mild odor.
What is LOCTITE ABLESTIK 8200TI known as Ablebond 8200TI (18.5g) used for?
Die attach adhesive
What are the hazard statements for LOCTITE ABLESTIK 8200TI known as Ablebond 8200TI (18.5g)?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE ABLESTIK 8200TI known as Ablebond 8200TI (18.5g)?
The melting point is Not available. and the boiling point is Not available..