NextSDS Logo
Safety Data Sheet EN

TEROSON RB 413 TESA 84191-GO000 EX

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON RB 413 TESA 84191-GO000 EX
Product Form
Sealing tapes
Product Code
3020888

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Resp. Sens. Cat. 1
Skin Sens. Cat. 1
STOT SE Cat. 3

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.
H334 MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
H336 MAY CAUSE DROWSINESS OR DIZZINESS.

Precautionary Statements

P233 Keep container tightly closed.
P261 Avoid breathing dust or fumes.
P264 Wash thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves.
P282 Wear eye and face protection.
P285 In case of inadequate ventilation wear respiratory protection.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to remove. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P342 + P311 If experiencing respiratory symptoms: Call a poison center or physician.
P352 IF ON SKIN: Wash with plenty of water.
P362 Take off contaminated clothing.
P403 Store in a well-ventilated place.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Rubber, natural 9006-04-6 10 - 30% Yes
Petroleum resins 64742-16-1 10 - 30% Yes
Calcium carbonate 471-34-1 10 - 30% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.

Skin contact

Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Seek medical attention from a specialist. Do not induce vomiting.

Immediate Medical Attention

Seek immediate medical attention for eye contact. Seek medical attention from a specialist for ingestion.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear self-contained breathing apparatus. Wear full protective clothing.

Firefighter Protection

Wear self-contained breathing apparatus. Wear full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not allow product to enter sewer or waterways. Prevent further leakage or spillage if safe to do so.

Cleanup methods

Scrape up spilled material and place in a closed container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash hands before breaks and immediately after handling the product.

Fire prevention

Keep away from heat, spark and flame.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Melting Point
Not determined
Odor Threshold
Not available.
Explosive Limits
---
Bulk Density
---
Crystallisation Point
---
Voc Content
Not determined
Solidification Point
---
Freezing Point
---
Odor
Characteristic
Relative Evaporation Rate
---
Colour
Black
Partition Coefficient
Not determined
Solubility In Water
Not determined
Physical State
Solid
Boiling Point
Not determined
Cloud Point
---
Molecular Weight
---
Flammability
---
Metal Corrosion
---
Softening Point
---
Relative Density
---
Physical State Data
solid
Upper Explosive Limit
Not available.
Solubility
---
Form
---
State Under Standard Conditions
---
Colour Intensity
---
Ph
Not applicable
Properties Status
---
Lower Explosive Limit
Not available.
Appearance
---
Kinematic Viscosity
---
Solubility In Fat
---
Dynamic Viscosity
---
Auto Ignition Temperature
Not determined
Evaporation Rate
Not determined
Decomposition Temperature
Not available.
Vapor Pressure
Not applicable
Vapor Density
Not applicable
Flash Point
Not available.
Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

None identified.

Incompatible

None identified.

Decomposition

None identified.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON RB 413 TESA 84191-GO000 EX?

The signal word is danger.

What is the physical form of TEROSON RB 413 TESA 84191-GO000 EX?

TEROSON RB 413 TESA 84191-GO000 EX is a solid with black color. It has characteristic odor.

What are the hazard statements for TEROSON RB 413 TESA 84191-GO000 EX?

This substance has 5 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
  • H336: MAY CAUSE DROWSINESS OR DIZZINESS.

What is the melting point of TEROSON RB 413 TESA 84191-GO000 EX?

The melting point is Not determined and the boiling point is Not determined.