Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA E-05CL known as Hysol E-05CL Epoxy ADH - Ultra
- Product Code
- 701961
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Part A of 2-K-Epoxy Adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Cyclohexanol, 4,4'-(1-methylethylidene)bis-, polymer with (chloromethyl)oxirane | 30583-72-3 | 60 - 80% | Yes |
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 10 - 30% | Yes |
| Neopentyl glycol diglycidyl ether | 17557-23-2 | 5 - 10% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. If symptoms develop and persist, get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
LOCTITE EA 615 A RESIN known as Hysol 615 RESIN
---
LOCTITE EA 9460F A known as Hysol(R) 9460F(TM) Resin
---
LOCTITE EA 3473 known as Loctite 3473 A+B Hysol
UFI: Y5G7-SXF9-J20R-N0DE
LOCTITE EA 9845LC 020-029 AERO known as HYSOL EA 9845 LSC 0.020/0.029 S
---
LOCTITE EA M-21HP A known as HYSOL M-21HP EPOXY 50ML PT A
---
LOCTITE STYCAST EO 1058 known as HYSOL EO1058;GA
---
LOCTITE EA 9695 050NW AERO known as HYSOL EA 9695 .050 PSF NW
---
LOCTITE EA 4108
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Keep container closed.
Store in original container until ready to use. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame. Protect from direct sunlight.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use local exhaust ventilation if the potential for airborne exposure exists.
gloves
Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists.
Use a NIOSH approved respirator if ventilation is inadequate.
Use chemical resistant, impermeable clothing including an apron or body suit to prevent skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Not available.
Not available.
Reaction with some curing agents may produce an exothermic reaction which in large masses could cause runaway polymerization.
Not available.
Strong oxidizing agents. Strong acids. Strong bases. Amines. Mercaptans. Ammonia. Alcohols. Acids.
Oxides of carbon. Phenolics. Aldehydes. Halogenated compounds. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Bisphenol-A Epichlorhydrin resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EA E-05CL known as Hysol E-05CL Epoxy ADH - Ultra?
The signal word is warning.
What is the physical form of LOCTITE EA E-05CL known as Hysol E-05CL Epoxy ADH - Ultra?
LOCTITE EA E-05CL known as Hysol E-05CL Epoxy ADH - Ultra is a liquid with clear, yellow color.
What is the solubility of LOCTITE EA E-05CL known as Hysol E-05CL Epoxy ADH - Ultra?
Negligible Water
What is LOCTITE EA E-05CL known as Hysol E-05CL Epoxy ADH - Ultra used for?
Part A of 2-K-Epoxy Adhesive
What are the hazard statements for LOCTITE EA E-05CL known as Hysol E-05CL Epoxy ADH - Ultra?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE EA E-05CL known as Hysol E-05CL Epoxy ADH - Ultra?
The melting point is Not available. and the boiling point is > 149 °C (> 300.2 °F) 1,013 hPa.