Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA M-21HP A known as HYSOL M-21HP EPOXY 50ML PT A
- Product Code
- 1510773_209671
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy resin
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Canada Corporation
manufacturer
Meadowpine Boulevard 2515, Mississauga, Ontario L5N 6C3
+1 (905) 814-6511
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 80 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. If symptoms develop and persist, get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention if symptoms develop and persist or after ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Burning produces obnoxious and toxic fumes. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE EA E-20HP A RESIN known as DB EPOXY ADH E-20HP 200ML RESIN
---
LOCTITE EA 3473 known as Loctite 3473 A+B Hysol
UFI: Y5G7-SXF9-J20R-N0DE
LOCTITE EA 9696 40M AERO known as HYSOL EA 9696 40mil NW
---
LOCTITE STYCAST ES 6510 PTA known as HYSOL ES6510 PART A 5 GAL
---
LOCTITE STYCAST ES 4412 PTB known as HYSOL ES4412 PART B GAL
---
LOCTITE STYCAST ES 0514 PTA known as HYSOL ES0514 PART A EU 55 GAL
---
LOCTITE SI 5607 B known as LOCTITE 5607 SIL PTB 400ML
---
LOCTITE HHD 8190R 50ML PTB
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Keep container closed.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame. Protect from direct sunlight.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use local exhaust ventilation if the potential for airborne exposure exists.
Use chemical resistant, impermeable clothing including gloves
Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists.
Use a NIOSH approved respirator if ventilation is inadequate.
Use chemical resistant, impermeable clothing including gloves and either an apron or body suit to prevent skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Reaction with some curing agents may produce an exothermic reaction which in large masses could cause runaway polymerization.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight.
Acids. Bases. Oxidizing agents. Amines.
Oxides of carbon. Oxides of nitrogen. Aldehydes. Formaldehyde Acids. Acrylic monomers. Toxic fumes. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Epoxy resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EA M-21HP A known as HYSOL M-21HP EPOXY 50ML PT A?
The signal word is warning.
What is the physical form of LOCTITE EA M-21HP A known as HYSOL M-21HP EPOXY 50ML PT A?
LOCTITE EA M-21HP A known as HYSOL M-21HP EPOXY 50ML PT A is a liquid with light yellow, off white color. It has mild, epoxy odor.
What is the solubility of LOCTITE EA M-21HP A known as HYSOL M-21HP EPOXY 50ML PT A?
Not miscible or difficult to mix Water; Partially miscible ketones; Negligible
What is LOCTITE EA M-21HP A known as HYSOL M-21HP EPOXY 50ML PT A used for?
Epoxy resin
What are the hazard statements for LOCTITE EA M-21HP A known as HYSOL M-21HP EPOXY 50ML PT A?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE EA M-21HP A known as HYSOL M-21HP EPOXY 50ML PT A?
The melting point is Not applicable, Product is a liquid and the boiling point is > 260 °C (> 500°F).