NextSDS Logo
Safety Data Sheet EN

TEROSON RB 3240 DR135KG

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON RB 3240 DR135KG
Product Code
1956541

Regulatory Identifiers

CAS Number
N/A

Identified Uses

adhesive and sealant

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Irrit. Cat. 2A
Skin Sens. Cat. 1
Carc. Cat. 1A

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.
H350 MAY CAUSE CANCER.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P261 Avoid breathing dust or fumes.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P352 IF ON SKIN: Wash with plenty of water.
P363 Wash contaminated clothing before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Limestone 1317-65-3 10 - 30% Yes
Calcium carbonate 471-34-1 10 - 30% Yes
Talc 14807-96-6 10 - 30% Yes
Propylidynetrimethyl trimethacrylate 3290-92-4 0.1 - 1% Yes
Carbon black 1333-86-4 0.1 - 1% Yes
Quartz (SiO2), <1% respirable 14808-60-7 0.1 - 1% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air, consult doctor if complaint persists.

Skin contact

Rinse with running water and soap. If symptoms develop and persist, get medical attention.

Eye contact

Rinse immediately with plenty of running water (for 10 minutes). Seek medical attention if necessary.

Ingestion

Rinse out mouth, drink 1-2 glasses of water, do not induce vomiting.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

In case of fire toxic gases can be released.

Instructions

Wear self contained breathing apparatus. Wear full protective clothing.

Firefighter Protection

Wear self contained breathing apparatus. Wear full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Use only with adequate ventilation. Do not take internally. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat and direct sunlight.

Hygiene

Wash thoroughly after handling.

Fire prevention

Keep away from heat.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Bulk Density
---
Metal Corrosion
---
Physical State Data
solid
Dynamic Viscosity
---
Solubility In Water
Insoluble
Vapor Pressure
Not available.
Ph
Not available.
Solubility
---
State Under Standard Conditions
---
Explosive Limits
---
Relative Evaporation Rate
---
Density
---
Colour Intensity
---
Crystallisation Point
---
Properties Status
---
Flammability
Not applicable
Auto Ignition Temperature
Not available.
Cloud Point
---
Solubility In Fat
---
Form
---
Relative Density
---
Odor
characteristic
Colour
black
Vapor Density
Not available.
Lower Explosive Limit
Not available.
Freezing Point
---
Voc Content
Not available.
Softening Point
---
Kinematic Viscosity
---
Odor Threshold
Not available.
Partition Coefficient
Not available.
Molecular Weight
---
Decomposition Temperature
Not available.
Flash Point
Not available.
Boiling Point
Not available.
Upper Explosive Limit
Not available.
Solidification Point
---
Evaporation Rate
Not available.
Melting Point
Not available.
Appearance
---
Physical State
pasty
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

None identified.

Decomposition

Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON RB 3240 DR135KG?

The signal word is danger.

What is the physical form of TEROSON RB 3240 DR135KG?

TEROSON RB 3240 DR135KG is a pasty with black color. It has characteristic odor.

What is TEROSON RB 3240 DR135KG used for?

adhesive and sealant

What are the hazard statements for TEROSON RB 3240 DR135KG?

This substance has 3 hazard statements:

  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H350: MAY CAUSE CANCER.

What is the melting point of TEROSON RB 3240 DR135KG?

The melting point is Not available. and the boiling point is Not available..