Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Loctite® PL300® Foamboard Construction Adhesive
- Product Code
- 1421941
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Assembly adhesive, dispersion
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 30 - 60% | Yes |
| Quartz (SiO2), <1% respirable | 14808-60-7 | 0.1 - 1% | Yes |
| dipotassium peroxodisulphate | 7727-21-1 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
No specific treatment is necessary since material is not likely to be hazardous by inhalation.
Wash affected area immediately with soap and water.
Immediately flush eyes with plenty of water for at least 15 minutes.
Consult a physician if necessary.
Immediate Medical Attention
If symptoms develop and persist, get medical attention. Consult a physician if necessary.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, foam, powder Water fog.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
Use water spray to keep fire exposed containers cool and disperse vapors.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Not available.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Loctite® PL® Premium Polyurethane Construction Adhesive
---
Loctite PL Premium Polyurethane Construction Adhesive
---
DAP Foamboard Construction Adhesive
---
Loctite Power Grab Express Panel & Foam
---
Loctite 330
---
LOCTITE 3001
---
Loctite 2701
---
Loctite 4105 Instant Adhesive
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid prolonged or repeated skin contact with this material. Keep out of the reach of children.
Store at or above 0 °C (32°F). Keep from freezing. Store in a cool, dry area. Keep containers closed when not in use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Heat. Do not freeze.
Oxides of carbon. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Loctite® PL300® Foamboard Construction Adhesive?
The signal word is danger.
What is the physical form of Loctite® PL300® Foamboard Construction Adhesive?
Loctite® PL300® Foamboard Construction Adhesive is a liquid with blue color. It has mild, acrylic odor.
What is the solubility of Loctite® PL300® Foamboard Construction Adhesive?
Soluble
What is Loctite® PL300® Foamboard Construction Adhesive used for?
Assembly adhesive, dispersion
What are the hazard statements for Loctite® PL300® Foamboard Construction Adhesive?
This substance has 3 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
What is the melting point of Loctite® PL300® Foamboard Construction Adhesive?
The melting point is Not available. and the boiling point is 100 °C (212°F).