Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE AA HF8000 B known as LOCTITE HF8000 SPEED 40/CS PT B
- Product Code
- 1416306_AB8110
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Acrylics
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Benzoyl peroxide | 94-36-0 | 10 - 30% | Yes |
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 10 - 30% | Yes |
| Benzyl butyl phthalate | 85-68-7 | 10 - 30% | Yes |
| Ethene, homopolymer | 9002-88-4 | 10 - 30% | Yes |
| ammonium iron(3+) hexakis(cyano-C)ferrate(4-) | 25869-00-5 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Flush with copious amounts of water, preferably, lukewarm water for at least 15 minutes, holding eyelids open all the time. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Not available.
Danger of decomposition if exposed to heat. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Remove all sources of ignition. Ensure adequate ventilation. Wear appropriate personal protective equipment. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
LOCTITE AA H8110 B known as LOCTITE H8110 SPEED 490ML PT B
---
LOCTITE AA H8000 B known as H8000 SPEEDBONDR 490ML DUAL
---
LOCTITE AA HF8150 A known as LOCTITE HF8150 50ML PT A
---
LOCTITE AA H3101 B known as SPEEDBONDER H3101 400 ML PART B
---
LOCTITE AA H3101 B known as SPEEDBONDER H3101 50 ML PART B
---
LOCTITE AA H8700 DC400ML PT B
---
LOCTITE LB 8009
---
LOCTITE AA H4500 490ML PT B
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat, spark and flame. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Keep container closed.
Store at or below 38 °C (100.4 °F). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame. Protect from direct sunlight.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Polymerization may occur at elevated temperature or in the presence of incompatible materials.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. Do not mix in batches greater than 100 grams (0.22 pounds) unless you plan to use immediately.
Oxidizing agents. Acids. Bases.
Oxides of carbon. Phenolics. Toxic fumes. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3109
- Shipping Name
- Organic peroxide type F, liquid (Dibenzoyl peroxide, stable dispersion in water, <=42%) (Butyl-benzyl-phthalate)
- Transport Class
- 5.2
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE AA HF8000 B known as LOCTITE HF8000 SPEED 40/CS PT B?
The signal word is danger.
What is the physical form of LOCTITE AA HF8000 B known as LOCTITE HF8000 SPEED 40/CS PT B?
LOCTITE AA HF8000 B known as LOCTITE HF8000 SPEED 40/CS PT B is a liquid, paste with blue color. It has slight, characteristic odor.
What is the solubility of LOCTITE AA HF8000 B known as LOCTITE HF8000 SPEED 40/CS PT B?
Slight Water
What is LOCTITE AA HF8000 B known as LOCTITE HF8000 SPEED 40/CS PT B used for?
Acrylics
What are the hazard statements for LOCTITE AA HF8000 B known as LOCTITE HF8000 SPEED 40/CS PT B?
This substance has 5 hazard statements:
- H242: HEATING MAY CAUSE A FIRE.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
What is the melting point of LOCTITE AA HF8000 B known as LOCTITE HF8000 SPEED 40/CS PT B?
The melting point is Not available. and the boiling point is > 93 °C (> 199.4 °F) 1,013 hPa.